00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第114页
7 Repairs to SmartFeeder 8 mm X 7.10 Tamp wheel 114 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 ► Remove the tamp wheel. ► If the bottom washer is still stuck to the spiral gear, take it and place it back on …
7 Repairs to SmartFeeder 8 mm X
7.10 Tamp wheel
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 113
► Tilt the feeder module to the right and hold the Al-
len screw on the spiral gear with one finger.
► Remove the slotted screw.
► Remove the spiral gear.
► Remove the top washer from the spiral gear.
7 Repairs to SmartFeeder 8 mm X
7.10 Tamp wheel
114 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
► Remove the tamp wheel.
► If the bottom washer is still stuck to the spiral
gear, take it and place it back on the axis.
7.10.2 Fitting the tamp wheel
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Make sure that there is a washer on the axis.
7 Repairs to SmartFeeder 8 mm X
7.10 Tamp wheel
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 115
► Fit the tamp wheel on the axis, as shown in the
diagram.
► Place the top washer onto the tamp wheel.
► Insert the spiral gear as shown in the diagram.