00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第55页
6 Repairs to SmartFeeder 4 mm X 6.9 Rocker Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 55 6.9.2 Fitting the rocker ► Carefully place the feeder module with the right side down on a stable, level and clean sur…
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
54 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
6.9.1 Removing the rocker
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Use a size 1 flat-bladed screwdriver to loosen the
bearing shaft (1) for the rocker.
► Press down on the rocker from above, to take the
tension off the bearing shaft.
► Pull the bearing shaft upwards and out with flat
pliers or a similar tool.
► Lift the rocker up and out of the feeder module.
► Remove the pressure spring.
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 55
6.9.2 Fitting the rocker
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Fit the pressure springs into the feeder module
base unit.
► Push the pressure spring sideways into the
rocker guidance.
► Press the rocker from above (as shown) into a
position from which you have a full view of the
bearing shaft hole.(1)
► Insert the bearing shaft with its thread first into
this hole.(2)
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
56 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
► Fasten the bearing shaft hand-tight with a size 1
flat-bladed screwdriver.
6.9.3 Replacing individual rocker parts
Required spare parts
Fig.13: Individual rocker parts
Feeder module Position Item no. Designation
SmartFeeder 4mm X 1 03135354-xx Rocker for foil disposal X4Smart
2 03135459Sxx Cover plate, rocker V2 X4Smart
3 00322564-xx SN 213307-H-M2 x 4-A2
4 03134326Sxx Tamp wheel assy. steel X4Smart V2
5 03122867Sxx Bearing shaft, bronze, tamp wheel rocker
X4Smart
Tools required:
●
Flat-bladed screwdriver size 1
●
TORX screwdriver T8