00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第159页
8 Repairs to SmartFeeder 2x8 mm X 8.7 Drives Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 159 ► Remove the circlip from the axis on toothed wheel 4. Use suitable circlip pliers for this. ► Remove the washer. ►…
8 Repairs to SmartFeeder 2x8 mm X
8.7 Drives
158 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
► Loosen the screw on the wiper plate.(1)
► Press the two rockers towards the back. (2)
► Remove the wiper plate.(3)
► Remove the circlip from the axis on the tamp
wheel.
Use suitable circlip pliers for this.
► Remove the washer.
► Press the right rocker towards the back.(1)
► Pull the tamp wheel off the axis.(2)
8 Repairs to SmartFeeder 2x8 mm X
8.7 Drives
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 159
► Remove the circlip from the axis on toothed
wheel 4.
Use suitable circlip pliers for this.
► Remove the washer.
► Pull toothed wheel 4 straight up (vertically) and
off the axis.
Fitting shifted gear 1 foil right
► Clean the area around the two spindles.
► Grease the two spindles with Polylub GLY801.
► Insert the new toothed wheel 4 as far as the stop
onto the axis.
8 Repairs to SmartFeeder 2x8 mm X
8.7 Drives
160 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
► Place the washer onto the axis for toothed wheel
4.
► Fasten the circlip to the axis.
Use the relevant circlip pliers for this.
► Press the rocker towards the back.(1)
► Push the tamp wheel as far as the stop onto the
axis.(2)
► Place the washer onto the axis on the tamp
wheel.
► Fasten the circlip to the axis.
Use the relevant circlip pliers for this.