00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第269页

10 Repairs to SmartFeeder 24 - 104 mm X 10.9 Rocker Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 269 10.9.1.2 Fitting the rocker ► Carefully place the feeder module with the right side down on a stable, level …

100%1 / 286
10 Repairs to SmartFeeder 24 - 104 mm X
10.9 Rocker
268 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
10.9.1.1 Removing the rocker
► Remove the right side wall (see 10.3.3 "Rear side
wall on the right" [}231])
► Remove the pressure spring.
To do this, use a pair of tweezers to pull the pres-
sure spring and spring holder sideways and out
of the feeder module base unit.
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Loosen the collar screw, which fixes the rocker
axis.
Use a size 2 flat-bladed screwdriver to help you.
► Use a size 1.4 split pin punch to push the rocker
axis out of the hole.
► Lift the rocker up and out of the feeder module
base unit.
10 Repairs to SmartFeeder 24 - 104 mm X
10.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 269
10.9.1.2 Fitting the rocker
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Insert the rocker, as shown, from above into the
feeder module base unit.
Make sure that you can see through the drilled
hole for the rocker axis.
► Insert the collar screw into the hole and screw
tight.
► Carefully place the feeder module with the left
side down on a stable, level and clean surface.
► Push the rocker axis into the hole shown in the
diagram, as far as the stop.
10 Repairs to SmartFeeder 24 - 104 mm X
10.9 Rocker
270 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
► Insert the pressure spring with the rear part into
the spring holder.
► Push the pressure spring then with the front part
first into the fitting on the rocker.
► Then push the rear part of the pressure spring
with spring holder sideways into the feeder mod-
ule base unit.
► Fasten the right rear side wall (see 10.3.3 "Rear
side wall on the right" [}231])
10.9.2 Spare parts on the rocker
Required spare part
Fig.98: Spare parts on the rocker
Feeder module Pos Item no. Designation
SmartFeeder
24 - 104mmX
4 03003122-xx Compensating disk /DI3.1
5 03048855-xx Pressure spring 0.75x6.25x31x8.5
6 03127310-xx Spring support, plastic X24-104Smart
7 03113542-xx Side plate right, rocker X24-104
8 03109677-xx Side plate left, rocker X24-104
SmartFeeder 24mmX 1 03115758-xx Stuffing gear interlocked complete rocker /
X24Smart
2 03109851Sxx Rocker wiper X24Smart
3 03113049-xx Rocker axis X24
SmartFeeder 32mmX 1 03116451-xx Stuffing gear interlocked complete rocker /
X32Smart
2 03116457-xx Rocker wiper X32Smart
3 03116454Sxx Rocker axis X32