00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第54页
6 Repairs to SmartFeeder 4 mm X 6.9 Rocker 54 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 6.9.1 Removing the rocker ► Carefully place the feeder module with the right side down on a stable, level and clean su…
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 53
6.8.2.4 Replacing the rocker bearing unit
► Loosen the foil rocker unit (see 6.8.1.1 "Removing the Foil Rocker Assembly" [}48]).
► Remove the foil rocker and the pressure spring (see6.8.2.1 "Replacing the foil rocker, axis and
pressure spring" [}50]).
► Remove the light barrier transmitter (see 6.8.2.3 "Replacing the light barrier transmit-
ter" [}52]).
The rocker bearing unit has now been isolated and can be replaced.
► Fasten the light barrier transmitter to the new rocker bearing unit (see 6.8.2.3 "Replacing the
light barrier transmitter" [}52]).
► Fasten the foil rocker (see 6.8.2.1 "Replacing the foil rocker, axis and pressure spring" [}50]).
► Fasten the foil rocker unit (see 6.8.1.2 "Fitting the Foil Rocker Assembly" [}49]).
6.9 Rocker
Required spare part:
Fig.12: Rocker for foil disposal assy. X4Smart
Feeder module Position Item no. Designation
SmartFeeder 4mm X 1 03135376Sxx Rocker for foil disposal assy. X4Smart
2 03136794Sxx Compressed spring rocker X4Smart
3 03122867Sxx Bearing shaft, bronze, tamp wheel rocker
X4Smart
Tools required:
●
Flat-bladed screwdriver size 1
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
54 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
6.9.1 Removing the rocker
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Use a size 1 flat-bladed screwdriver to loosen the
bearing shaft (1) for the rocker.
► Press down on the rocker from above, to take the
tension off the bearing shaft.
► Pull the bearing shaft upwards and out with flat
pliers or a similar tool.
► Lift the rocker up and out of the feeder module.
► Remove the pressure spring.
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 55
6.9.2 Fitting the rocker
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Fit the pressure springs into the feeder module
base unit.
► Push the pressure spring sideways into the
rocker guidance.
► Press the rocker from above (as shown) into a
position from which you have a full view of the
bearing shaft hole.(1)
► Insert the bearing shaft with its thread first into
this hole.(2)