00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第53页
6 Repairs to SmartFeeder 4 mm X 6.9 Rocker Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 53 6.8.2.4 Replacing the rocker bearing unit ► Loosen the foil rocker unit (see 6.8.1.1 "Removing the Foil Rocker As…
6 Repairs to SmartFeeder 4 mm X
6.8 Foil rocker
52 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
6.8.2.2 Replacing the creasing roller and roller axis
Removing individual parts
► Pull the creasing roller out of the foil rocker, to-
gether with the roller axis.(1)
► Push the roller axis sideways out of the creasing
roller.(2)
Defective parts can now be replaced.
Fitting individual parts
► Insert the roller axis sideways into the creasing
roller.(1)
► Insert the creasing roller into the foil rocker, to-
gether with the roller axis.(2)
6.8.2.3 Replacing the light barrier transmitter
► Loosen the foil rocker (see 6.8.1.1 "Removing the
Foil Rocker Assembly" [}48]).
► Remove the screw, which fastens the light barrier
transmitter to the rocker bearing unit.
► Pull the light barrier transmitter downwards and
out of the rocker bearing unit.
► Insert the new light barrier transmitter from below
into the rocker bearing unit, as shown.
► Screw the light barrier transmitter to the rocker
bearing unit.
► Fasten the foil rocker (see 6.8.1.2 "Fitting the Foil
Rocker Assembly" [}49]).
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 53
6.8.2.4 Replacing the rocker bearing unit
► Loosen the foil rocker unit (see 6.8.1.1 "Removing the Foil Rocker Assembly" [}48]).
► Remove the foil rocker and the pressure spring (see6.8.2.1 "Replacing the foil rocker, axis and
pressure spring" [}50]).
► Remove the light barrier transmitter (see 6.8.2.3 "Replacing the light barrier transmit-
ter" [}52]).
The rocker bearing unit has now been isolated and can be replaced.
► Fasten the light barrier transmitter to the new rocker bearing unit (see 6.8.2.3 "Replacing the
light barrier transmitter" [}52]).
► Fasten the foil rocker (see 6.8.2.1 "Replacing the foil rocker, axis and pressure spring" [}50]).
► Fasten the foil rocker unit (see 6.8.1.2 "Fitting the Foil Rocker Assembly" [}49]).
6.9 Rocker
Required spare part:
Fig.12: Rocker for foil disposal assy. X4Smart
Feeder module Position Item no. Designation
SmartFeeder 4mm X 1 03135376Sxx Rocker for foil disposal assy. X4Smart
2 03136794Sxx Compressed spring rocker X4Smart
3 03122867Sxx Bearing shaft, bronze, tamp wheel rocker
X4Smart
Tools required:
●
Flat-bladed screwdriver size 1
6 Repairs to SmartFeeder 4 mm X
6.9 Rocker
54 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
6.9.1 Removing the rocker
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Use a size 1 flat-bladed screwdriver to loosen the
bearing shaft (1) for the rocker.
► Press down on the rocker from above, to take the
tension off the bearing shaft.
► Pull the bearing shaft upwards and out with flat
pliers or a similar tool.
► Lift the rocker up and out of the feeder module.
► Remove the pressure spring.