00197723-12_UG_SE3.11_EN.pdf - 第41页
SMA Guide SIPLACE Explorer 4 Functions Overview from 3.11 (R20-2) Edition 11/2020 EN 4 1 – Line: St ate Schedule A summary of schedule d times withi n the evaluat ion interv al. Sc heduled states are defined within the C…
4 Functions Overview SMA Guide SIPLACE Explorer
Edition 11/2020 EN from 3.11 (R20-2)
40
4
Fig. 4 - 5 Line schedule
– Line: Shift Schedule
Displays the shifts that occurred within the evaluation interval. The shift name as well as the
scheduled start and end time and date are listed. Scheduling of shifts is accomplished within
the Calendar. For further information please refer to SIPLACE Explorer Getting Started.
– Operation Time Summary
A summary of the Operational Time (Scheduled)/Nonscheduled time for the evaluation
interval. Nonscheduled time is considered when no shift has been scheduled. Shifts are
defined by the calendar. For further information please refer to SIPLACE Explorer Getting
Started.
SMA Guide SIPLACE Explorer 4 Functions Overview
from 3.11 (R20-2) Edition 11/2020 EN
41
– Line: State Schedule
A summary of scheduled times within the evaluation interval. Scheduled states are defined
within the Calendar. For further information please refer to SIPLACE Explorer Getting Started.
A scheduled state can be for the entire line or for a particular machine.
–#
Entry Number
–Start Time
Start Date and Time for the scheduled interval.
– End Time
End Date and Time for the scheduled interval.
– Machine
"All" if the scheduled state relates to all machines within the line, otherwise the name of the
particular machine.
–State
Category of Scheduled State (Either Engineering or Scheduled Downtime).
The following procedures can be performed on this page and are described in this SMA
User Guide:
“How to Specify the Generation of Line Reports” on page 90
“How to Sort Tables” on page 96
“How to Enable Legends” on page 96
4 Functions Overview SMA Guide SIPLACE Explorer
Edition 11/2020 EN from 3.11 (R20-2)
42
4.1.5 E10 State Summary
From this page a Stacked Bar Chart is shown providing the E10 State summary for each machine
within the line, as well as the Overall E10 State summary for the complete line, for the selected
duration. 4
Unknown Time is also included (System - Turned off/Disconnected). 4
NOTE
There is a special OIS status module realized in SIPLACE OIS. This OIS status module is shown
in the SIPLACE Explorer status module which matches the SEMI E10 status module. This may
lead to deviations in the states and status times shown between OIS and SIPLACE Explorer. A
direct comparison is therefore not possible. For further details, please refer to the Software
Version Description SIPLACE Explorer. See also “Relationship Between E10 State Summary and
Performance” on page 26. 4
4
Fig. 4 - 6 E10 state summary