00197723-12_UG_SE3.11_EN.pdf - 第72页

4 Functions Overview SMA Guide SIPLACE Explorer Edition 11/2020 EN from 3.11 (R20-2) 72 Explanation of T able : 4 For each Board within the evaluation interva l: 4 – Panel ID: The Number of the Boar d within the evaluati…

SMA Guide SIPLACE Explorer 4 Functions Overview

from 3.11 (R20-2) Edition 11/2020 EN

– Processing Time Summary for Specified Request (# Boards - Tabular View)

A summary view for the processing times encountered during the evaluation interval is

displayed within this table. It is possible that more than one recipe may be displayed,

dependant on the evaluation settings. The total number of boards considered within the

evaluation is displayed in the title bar of the table. For multiple processing zone machines, such

as the HS60, the processing time for each zone is displayed. 4

Explanation of Table: 4

For all boards within the evaluation interval: 4

– Cycle Name:

The processing time considered (Total, Processing in Zone N). 4

– Minimum:

The minimum processing time observed within the evaluation interval. 4

–Maximum:

The maximum processing time observed within the evaluation interval. 4

– Average:

The average processing time observed within the evaluation interval. 4

– Processing Time by Panel (Bar Chart)

Displays Processing time for each board, up to a maximum of 1000 boards for the evaluation

interval. If more than 1000 boards are selected for the evaluation interval, only the first 1000

will be displayed on the chart. The evaluation interval must be adjusted if you wish to view

boards towards the end of an interval, if greater than 1000. It is possible that more than one

recipe may be displayed within the chart, dependant on evaluation settings. The build time by

Zone, as well as waiting/Moving time is displayed on this chart. Selection/De-selection and

Zooming are supported. 4

– Processing Time Summary by Panel (Tabular View)

A listing of each board with additional details, processed within the evaluation interval. Recipe

name, Time of Completion, Shift and Processing Time are included. Maximum Display is for

1000 boards. The evaluation interval must be adjusted if you wish to view boards towards the

end of an interval, if greater than 1000. It is possible that more than one recipe may be

displayed within the chart, dependant on evaluation settings. 4

4 Functions Overview SMA Guide SIPLACE Explorer

Edition 11/2020 EN from 3.11 (R20-2)

Explanation of Table: 4

For each Board within the evaluation interval: 4

– Panel ID:

The Number of the Board within the evaluation. 4

–Timestamp:

The completion time/date of the boards within the evaluation interval. 4

– Job/Recipe:

The recipe name for the board. 4

–Shift:

The shift scheduled when the board was processed. 4

– Total Processing Time:

Total Processing Time for the board. 4

– Processing Times definitions

The E10 definition for "Processing Time" includes the time from the equipment was loaded with

the work piece, to unload of the work piece, and includes all processing and wait times, while

the work piece is present within the equipment. It is possible to derive this time, for this purpose

as "Total Processing". However for most SMT users, of inline equipment, it is generally useful

to understand the times that the machine is actively processing. With a multiple zone machine,

it is of interest to understand the processing of each zone, as this possibility can afford the

possibility to further improve the optimization of a production line, and it's constituent

machines. 4

– Processing in zone "N"

Processing Time for the Zone is defined from the Start of Processing, to the End of Processing

for the Zone. Should an interruption occur during the Processing, it is also included. 4

ProcessT(ZoneN) = EndTime(ZoneN) - StartTime(ZoneN) 4

– Waiting/Moving

Waiting and Moving is the sum of time from when the board arrives to the input conveyor, to

when Processing is started, and the time from when processing is completed, to when the

board leaves the output conveyor. 4

Machines with one processing zone: 0 4

For multiple zone machines, the time from completion of a prior processing zone, to the time

processing begins in the next zone is also included. 4

Wait_MoveT = (StartTime(ZoneN+1) - EndTime(ZoneN)) 4

SMA Guide SIPLACE Explorer 4 Functions Overview

from 3.11 (R20-2) Edition 11/2020 EN

– Total Processing

The Sum of all Processing Time and Move/Wait Times for the equipment. 4

ProcessT_total = (Wait_MoveT + ProcessT(ZoneN) + ProcessT(ZoneN+1) ...) 4

– Bar Chart Segments

Holding the mouse over a segment of the bar chart will display in a tool tip the value of the

segment. 4

– Scaling Zoom In/Out

By clicking and dragging - it is possible to zoom the scale of the bar chart for viewing of smaller

values. This is especially useful if a large value is displayed elsewhere on the chart and you

wish to view a smaller value. Double clicking near the top of the chart will return the Zoom

Factor to the original. 4

The following procedures can be performed on this page and are described in this SMA

User Guide:

 “How to Sort Tables” on page 96

 “How to Enable Legends” on page 96

4.2.2.3 Performance Daily

The function of this page is similar to the "Line Performance" diagram providing key data for the

specific machine for the selected evaluation interval, on a daily basis. From this view, weekly or

monthly reports (By Day) can also be provided, according to the evaluation interval setting. 4

NOTE

The data provided on this page is MaDaMas data and does not show the E10 status module. Use

the displayed information to compare a Line Computer Unix production line with a SIPLACE

Explorer production line. 4