Service Manual SIPLACE SmartFeeder.pdf - 第114页
7 Repairs to SmartFeeder 8 mm X / Xi 7.5 Pickup window 114 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 ► Fasten the actuator axis with a fitting screw Use a 1.5mm Allen…
7 Repairs to SmartFeeder 8 mm X / Xi
7.5 Pickup window
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 113
7.5.3 Removing the actuator
► Remove the pickup window (see7.5.2 "Fitting the
pickup window" [}111]).
► Remove the fitting screw shown in the diagram.
Use a 1.5mm Allen key.
► Pull the actuator on the righthand side of the
feeder module out of the base unit.
7.5.4 Fitting the actuator
► Push the actuator on the righthand side of the
feeder module into the base unit as shown.
During this, push the actuator axis into the hole
shown in the diagram.
7 Repairs to SmartFeeder 8 mm X / Xi
7.5 Pickup window
114 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
► Fasten the actuator axis with a fitting screw
Use a 1.5mm Allen key for this.
► Fasten the pickup window (see 7.5.2 "Fitting the
pickup window" [}111]).
7 Repairs to SmartFeeder 8 mm X / Xi
7.6 Splice sensor
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 115
7.6 Splice sensor
NOTICE
Removing retrofitted splice sensors
Each SmartFeeder 8mmX is prepared for using a splice sensor, although it is supplied
without the splice sensor. To re-establish this delivery state, you need to remove any retro-
fitted splice sensors before you send the feeder module back to the manufacturer for re-
pairs.
Spare part required
Splice sensor Dummy splice sensor
Sensor insertion tunnel X8Smart
Screw RF-SN65-2.5 x 12-9.8
Splice sensor filling piece assy.
Feeder module Item no. Designation
SmartFeeder 8mm X
SmartFeeder 8 mm Xi
03107028 -xx Splice sensor X8Smart assembly
03104558 -xx Dummy splice sensor X8Smart
03127503-xx Sensor insertion tunnel X8Smart
03033496-xx RF-SN65-2.5 x 12-9.8
03097801-xx Splice sensor filling piece assy.
Tools required
●
TORX screwdriver 0.6Nm, size T8