Service Manual SIPLACE SmartFeeder.pdf - 第41页

6 Repairs to SmartFeeder 4 mm X / Xi 6.5 Pickup window Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 41 6.5.4 Fitting the actuator ► Push the actuator on the righthand sid…

100%1 / 246
6 Repairs to SmartFeeder 4 mm X / Xi
6.5 Pickup window
40 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
6.5.3 Removing the actuator
► Remove the pickup window (see6.5.1 "Removing
the Pickup Window" [}37]).
► Remove the sealing element (1) from the fitting
screw hole(2)
.
► Remove the fitting screw shown in the diagram.
(2)
Use a 1.5mm Allen key.
► Pull the actuator on the righthand side of the
feeder module out of the base unit.
6 Repairs to SmartFeeder 4 mm X / Xi
6.5 Pickup window
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 41
6.5.4 Fitting the actuator
► Push the actuator on the righthand side of the
feeder module into the base unit as shown.
During this, push the actuator axis into the hole
shown in the diagram.
► Fasten the actuator axis with a fitting screw(2).
Use a 1.5mm Allen key for this.
► Fit the sealing element (1) onto the fitting screw
hole (2).
► Fasten the pickup window (see 6.5.2 "Fitting the
pickup window" [}38]).
6 Repairs to SmartFeeder 4 mm X / Xi
6.6 Splice sensor
42 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
6.6 Splice sensor
NOTICE
Available only for SIPLACE SmartFeeder 4mm Xi
The splice sensor can be retrofitted for "SIPLACE SmartFeeder 4mm Xi" [00141478-02]
feeder modules.
Retrofitting of a splice sensor is not possible for the old "SIPLACE SmartFeeder 4mm
X" [00141368-xx] feeder modules!
Spare parts required
Feeder module Position Item no. Designation
SmartFeeder 4 mm Xi 03160408Sxx Splice sensor X4Smart assy.
1 03165059-xx Splice sensor X4Smart
2 03160301-xx Cover on splice sensor X4Smart
3 00328542-01 SN 213307-H-M2.5 x 6-A2
(4) 03164295-xx Flat flex cable, splice sensor X4Smart
(already fitted in the feeder module)
Tools required
●
Phillips screwdriver
●
Allen key, size 3