Service Manual SIPLACE SmartFeeder.pdf - 第137页
7 Repairs to SmartFeeder 8 mm X / Xi 7.9 Rocker Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 137 7.9.1.1 Removing the rocker assembly ► Carefully place the feeder module …
7 Repairs to SmartFeeder 8 mm X / Xi
7.9 Rocker
136 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
7.9 Rocker
7.9.1 Replacing the rocker assembly
Required spare part
Fig.41: Rocker for foil disposal assy. X8Smart
Feeder module Item no. Designation
SmartFeeder 8mm X
SmartFeeder 8 mm Xi
03104247-xx Rocker for foil disposal assy. X8Smart
03048855-xx Pressure spring 0.75x6.25x31x8.5
03042321-xx Bearing shaft for rocker /X8
Tools required
●
Flat-bladed screwdriver size 1
7 Repairs to SmartFeeder 8 mm X / Xi
7.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 137
7.9.1.1 Removing the rocker assembly
► Carefully place the feeder module with the right side
down on a stable, level and clean surface.
► Use a size 1 slotted screwdriver to loosen the bear-
ing shaft (1)
belonging to the rocker.
► Gently press the rocker backwards, against the
spring tension.
► Pull the bearing shaft completely out of the rocker.
► Relax the spring, by letting the rocker slowly rise up
again.
► Lift the rocker up and out of the feeder module.
► Remove the spring (2).
7.9.1.2 Fitting the rocker assembly
► Carefully place the feeder module with the right side
down on a stable, level and clean surface.
► Insert the spring(1) into the base of the feeder mod-
ule.
► Fit the rocker(2) onto the spring.
► Press the rocker over the rocker holder(3).
► Press the rocker into the spring (4).
► Move the rocker until you can completely see the
drilled hole for the rocker holder through the drilled
hole for the rocker itself(3)
.
► Push the bearing shaft(5) into the drilled hole, with
the thread first.
► Fasten the bearing shaft hand-tight with a size 1 slot-
ted screwdriver.
7 Repairs to SmartFeeder 8 mm X / Xi
7.9 Rocker
138 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
7.9.2 Replacing individual rocker parts
Required spare part
Fig.42: Rocker, tamp wheel and bearing shaft
Feeder module Item no. Designation
SmartFeeder 8mmX
SmartFeeder 8 mm Xi
03041017-xx Tamp wheel /rocker X8
03042321-xx Bearing shaft for rocker /X8
Tools required
●
Flat-bladed screwdriver
●
Tweezers
7.9.2.1 Removing the individual parts of the rocker
► Place the feeder on a stable, level and clean sur-
face.
► Remove the rocker as described in section
7.9.1.1
"Removing the rocker assembly" [}137].
► Unscrew the bearing shaft(1).
► Remove the tamp wheel.(2)
7.9.2.2 Fitting the individual parts of the rocker
► Insert the tamp wheel into the rocker.(1)
► Insert the bearing shaft through the hole in the
rocker, through the tamp wheel.
► Fasten the bearing shaft with the screw.(2)
► Fasten the rocker as described in section 7.9.1.2
"Fitting the rocker assembly" [}137].