Service Manual SIPLACE SmartFeeder.pdf - 第216页
8 Repairs to SmartFeeder 2x8 mm X / Xi 8.8 Drives 216 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 ► Press the rocker towards the back. (1) ► Push the tamp wheel as far …
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.8 Drives
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 215
► Pull toothed wheel 4 straight up (vertically) and
off the axis.
Fitting shifted gear 1 foil right
► Clean the area around the two spindles.
► Grease the two spindles with Polylub GLY801.
► Insert the new toothed wheel 4 as far as the stop
onto the axis.
► Place the washer onto the axis for toothed wheel
4.
► Fasten the circlip to the axis.
Use the relevant circlip pliers for this.
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.8 Drives
216 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
► Press the rocker towards the back.(1)
► Push the tamp wheel as far as the stop onto the
axis.(2)
► Place the washer onto the axis on the tamp
wheel.
► Fasten the circlip to the axis.
Use the relevant circlip pliers for this.
► Press the two rockers towards the back.(1)
► Push the wiper plate to the position shown so
that you can see the hole for the screw through
it.(2)
► Screw the wiper plate into place.(3)
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.8 Drives
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 217
► Push the shifted gear1 as far as the stop onto
the axis.
Make sure that the teeth in the shifted gear1 cor-
rectly engage with the teeth of the drive.
► Place the washer onto the axis of shifted gear 1.
► Fasten the circlip to the axis.
Use the relevant circlip pliers for this.
► Fasten the right side cover (see8.3.4 "Fitting the
Right Side Cover" [}176] ).