Service Manual SIPLACE SmartFeeder.pdf - 第14页

2 General 2.4 Safety Instructions 14 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 ● Tweezers ● Small flat nosed pliers ● Split pin punch size 1.4 ● Sliding foil remover i…

100%1 / 246
2 General
2.1 Requirements
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 13
2 General
NOTICE
Area of application
The tasks described in this manual apply for the following areas:
- SIPLACE SmartFeeder 4mmX / Xi
- SIPLACE SmartFeeder 8mmX / Xi
- SIPLACE SmartFeeder 2x8mmX / Xi
The service work on the SIPLACE® feeder modules SmartFeeder 12–104mmX is de-
scribed in the service manual "SIPLACE SmartFeeder 12–104mm" (German [00198780-
xx], English [00198781-xx]).
2.1 Requirements
To correctly repair X feeder modules, you require an ESD-compatible workplace with a stable, level
and clean surface.
2.2 Warranty
CAUTION
Observe the clauses in the warranty agreements for your feeder.
On the bottom right side of the tape drive, you will find a warranty seal. If you still have a
valid warranty claim for the feeder module, this will be violated if you break the warranty
seal.
2.3 Equipment Required
Tools
You need the following tools to remove and fasten the spare parts described in this manual:
Torque screw
driver
Phillips
interchange-
able bit
Flat-bladed
interchange-
able bit
Allen key
interchange-
able bit
size 2
Allen key
interchangeable
bit
size 3
TORX
interchangeable
bit
size T8
0.2 Nm X
0.35 Nm X X
0.6 Nm X X X X
0.9 Nm X
CAUTION
Observe the torque
The torque screwdriver and interchangeable bits are delivered separately.
Make sure that the bits are assigned correctly during assembly work.
●
Flat-bladed screwdriver size 0
●
Flat-bladed screwdriver size 1
●
Phillips screwdriver
●
TORX screwdriver size T8
●
Allen key size 1.5
●
Angled Allen key, size 2
●
Allen key size 3
●
Allen key size 4
2 General
2.4 Safety Instructions
14 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
●
Tweezers
●
Small flat nosed pliers
●
Split pin punch size 1.4
●
Sliding foil remover item no. 03075421-xx
●
Circlip pliers for outer rings 3-10 mm
●
Long clamping wrench item no. 03076659-xx
●
Sliding foil remover item no. 03075421-xx
●
Gauge for tape drive motor /X2x8, item no. 03080225-xx
●
Gauge for foil disposal motor /X2x8, item no. 03080235-xx
Materials
●
Grease Polylub GLY 801
●
Grease Klübersynth GE 14-151
●
Ethanol
●
Double-sided adhesive tape
2.4 Safety Instructions
CAUTION
Observe the ESD regulations!
When working on the feeder module, pay attention to ESD safety.
Before you open the side cover, make sure you are wearing the ESD protection wristband,
to prevent damage to the highly sensitive boards inside the feeder.
2 General
2.5 Creating new labels for feeder modules
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 15
2.5 Creating new labels for feeder modules
If you need replacement labels for your feeder modules, you can create these online, at the
SIPLACE website. Simply enter the serial number and the feeder ID of the SIPLACE feeder mod-
ule and the SIPLACE Feeder Label Tool will generate a new label for you to download.
► Start your internet browser.
1. Enter the URL www.asm-smt.com in the address line.
2. In the dropdown menu on the right of the header bar, select the website language: German,
English
or Chinese.
3. In the website menu bar, hover of MyASM with the mouse.
The MyASM menu will open.
4. Click on Feeder Label Tool.
5. Click on the Feeder Label Tool button.