Service Manual SIPLACE SmartFeeder.pdf - 第180页
8 Repairs to SmartFeeder 2x8 mm X / Xi 8.5 Pickup window 180 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 Spare part required Fig.59: Pickup window assy. SmartFeeder 2x8…
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.5 Pickup window
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 179
8.5 Pickup window
NOTICE
Conversion to the new version SmartFeeder 2x8mm Xi
The pickup area of the old and the new version of the pickup window are not compatible
with one another!
On introduction of the "SIPLACE SmartFeeder 2x8mm Xi" and "SIPLACE SmartFeeder 2x8mm Xi
Splice" feeder modules, the "SIPLACE SmartFeeder 2x8mm X" and "SIPLACE SmartFeeder
2x8mm X Splice Sensor" feeder modules have been discontinued.
At the same time, the new pickup window for the SmartFeeder 2x8mm Xi has also been introduced
as a spare part for the discontinued SmartFeeder 2x8mm X.
The individual parts of the pickup area in the old and new version are not compatible with one an-
other! If you want to replace individual spare parts (pickup window, pressure fork, tape duct) in
these feeder modules, you will need to completely upgrade the pickup areas of both tracks to the
new version.
In order to upgrade both feeder module tracks, you need 2x the spare part " Tape cutter with
pickup window /X2x8 V2" [03145735-xx].
The following section describes replacement of the individual parts in the new pickup area. To en-
sure that the parts from the old and new version are not confused with one another, pay attention
to the marking shown below on the SmartFeeder 2x8mm Xi pickup area parts.
Fig.58: Markings on SmartFeeder 2x8mm Xi spare parts
Feeder module SIPLACE SmartFeeder 2x8mm X, [00141269-xx]
SIPLACE SmartFeeder 2x8mm X splice sensor, [00141289-xx]
Spare parts
(no longer available)
Tape duct /X2x8 [03077354-xx]
Rocker lever /X2x8 [03053708-xx]
Collar screw /X2x8 [03077823-xx]
Pickup window assy. /X2x8 [03078710-xx]
Tape duct with pickup window /X2x8 V2 [03145735-xx]
Spare part
(Conversion package)
Tape duct with pickup window /X2x8 V2 [03145735-xx]
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.5 Pickup window
180 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
Spare part required
Fig.59: Pickup window assy. SmartFeeder 2x8 mm Xi
Feeder module Position Item no. Designation
SmartFeeder 2x8 mm Xi 1, 3, 4, 6, 7 03145735-xx Tape duct with pickup window /X2x8
V2
1 03145734-xx Tape duct, prefitted /X2x8 V2
3 03145733-xx Pickup window assy. /X2x8 V2
4 00349254-xx Fitting screw
6 03077394-xx Axis pickup window /X2x8
7 03165452-xx Pressure fork /X2x8 tilt function
2 03010210-xx ISO 7045 - M2.5 x 8-A2-50-H
5 03010214-xx ISO 7045 - M2.5 x 16-A2-50-H
8 03077928-xx Pressure spring 0.85x5.1x18.3
Tools and consumables required
●
Phillips screwdriver
●
Tweezers
●
Allen key 1.5
●
Grease Klubersynt GE 14-151 tub 45g, item no. 03005735-01
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.5 Pickup window
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 181
8.5.1 Removing the pickup window
► Remove the 2 marked screws fastening the rel-
evant pickup window and tape duct to the feeder
module.
► Lift the pickup window up and off, together with
the tape duct.(1)
► Also remove the pressure spring and the pres-
sure bracket, to prevent these being lost.(2)
► Remove the fitting screw fastening the pickup
window axis.