Service Manual SIPLACE SmartFeeder.pdf - 第218页

8 Repairs to SmartFeeder 2x8 mm X / Xi 8.9 Foil rocker 218 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 8.9 Foil rocker 8.9.1 Foil rocker assembly Spare part required Fig…

100%1 / 246
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.8 Drives
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 217
► Push the shifted gear1 as far as the stop onto
the axis.
Make sure that the teeth in the shifted gear1 cor-
rectly engage with the teeth of the drive.
► Place the washer onto the axis of shifted gear 1.
► Fasten the circlip to the axis.
Use the relevant circlip pliers for this.
► Fasten the right side cover (see8.3.4 "Fitting the
Right Side Cover" [}176] ).
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.9 Foil rocker
218 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
8.9 Foil rocker
8.9.1 Foil rocker assembly
Spare part required
Fig.67: Foil rocker assembly
Feeder module Item no. Designation
SmartFeeder 2x8mmX
SmartFeeder 2x8 mm Xi
03066480-xx Foil rocker assembly /X2x8
Tools required
●
TORX screwdriver 0.6Nm, size T8
●
Small flat-bladed screwdriver
8 Repairs to SmartFeeder 2x8 mm X / Xi
8.9 Foil rocker
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 219
8.9.1.1 Removing the Foil Rocker Cpl.
► Place the feeder on a stable, level and clean sur-
face.
► Remove the left and right side covers. (See 8.3.1
"Removing the Left Side Cover" [}174], 8.3.3
"Removing the Right Side Cover" [}175])
► Loosen and remove the TORX screws from the
foil rocker.(1)
► Push the foil rocker to the right(2)
► Remove the cable from the connection.(3)
8.9.1.2 Fitting the Foil Rocker Cpl.
► Insert the end of the flat ribbon cable (with the
blue side pointing upwards) as far as the stop in
the marked flat ribbon connection
. Fold the connection closed and make sure that
the cable is securely fitted. (1)
► Fit the foil rocker onto the feeder module
base.(2)
► Fix the foil rocker into place with 2 TORX
screws.(3)
► Refit the left and right side covers (see 8.3.2 "Fit-
ting the Left Side Cover" [}175], 8.3.4 "Fitting the
Right Side Cover" [}176]).