Service Manual SIPLACE SmartFeeder.pdf - 第59页

6 Repairs to SmartFeeder 4 mm X / Xi 6.9 Rocker Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 59 6.9.1.1 Removing the rocker assembly ► Carefully place the feeder module w…

6 Repairs to SmartFeeder 4 mm X / Xi

6.9 Rocker

58 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020

6.9 Rocker

6.9.1 Replacing the rocker assembly

Required spare part:

Fig.13: Rocker for foil disposal assy. X4Smart

Feeder module Position Item no. Designation

SmartFeeder 4mm X

SmartFeeder 4 mm Xi

1 03135376Sxx Rocker for foil disposal assy. X4Smart

2 03156877-xx Pressure spring for rocker 7.3N X4Smart

3 03042321-xx Bearing shaft for rocker /X8

Tools required:

●

Flat-bladed screwdriver size 1

6 Repairs to SmartFeeder 4 mm X / Xi

6.9 Rocker

Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 59

6.9.1.1 Removing the rocker assembly

► Carefully place the feeder module with the right

side down on a stable, level and clean surface.

► Use a size 1 flat-bladed screwdriver to loosen the

bearing shaft (1)

for the rocker.

► Press down on the rocker from above, to take the

tension off the bearing shaft.

► Pull the bearing shaft upwards and out with flat

pliers or a similar tool.

► Lift the rocker up and out of the feeder module.

► Remove the pressure spring.

6 Repairs to SmartFeeder 4 mm X / Xi

6.9 Rocker

60 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020

6.9.1.2 Fitting the rocker assembly

► Carefully place the feeder module with the right side

down on a stable, level and clean surface.

► Fit the pressure springs into the feeder module base

unit.

► Push the pressure spring sideways into the rocker

guidance.

► Press the rocker from above (as shown) into a posi-

tion from which you have a full view of the bearing

shaft hole.(1)

► Insert the bearing shaft with its thread first into this

hole.(2)

► Fasten the bearing shaft hand-tight with a size 1 flat-

bladed screwdriver.