YSM40R_Mainte_E.pdf - 第14页
xii Safety instructions n Label positions of cA TS W arning/caution labels cA TS n Parts supply station 91206-N9-00
xi
Safety instructions
Electrical shock hazard Could cause machine damage (collisions with head, etc.).
Before opening covers wait at least 100 seconds after turning
power off.
Verify that no objects have been placed on the top cover of the
feeder exchange carriage.
Could cause machine damage (collisions with head, etc.). Electrical shock hazard
Verify that no objects have been placed on the top cover of
the feeder exchange carriage.
Do not touch while power is supplied.
Electrical shock hazard
Do not touch while power is supplied.
xii
Safety instructions
n
Label positions of cATS
Warning/caution labels
cATS
n Parts supply station
91206-N9-00
xiii
Safety instructions
Injury from touching moving parts during machine operation Electrical shock hazard
Do not touch or tamper with safety cover switches and do not
operate machine if any safety cover switches were deactivated.
Do not touch power supply inside cover.
· Hands or fingers might be caught between moving parts
and covers, causing injury.
· Hands or fingers might be pinched by moving parts,
causing injury.
Injury from tape cutter
Never place hands or fingers in machine during operation
such as when handling tray magazines.
Do not put hands into cutter unit while power or air is
supplied.
Could cause machine damage (collisions with head, etc.). Machine damage
Verify that no objects have been placed on the top cover of
the feeder exchange carriage.
Do not apply strong force and impact to carriage and tape
cutter cover in machine.
Pallet may drop if setting up parts on the parts supply
station.
Could cause machine damage (collisions with head, etc.).
Remove pallets from parts supply station before setting up
parts.
Verify that no objects have been placed on the top cover of
the feeder exchange carriage.