YSM40R_Mainte_E.pdf - 第2页

w Be sure to read these safety instructions before using Y AMAHA surface mounters or related products. Safety instructions SFSMT -EN-181-0100 Safety instr uctions Contents CE marking i 1. W arning labels ii 1.1 W arning …

YAMAHA SMT Assembly System

EMN918C200

Surface Mounter

Maintenance Manual

YSM40R

Be sure to read these safety instructions before using YAMAHA surface mounters or related products.

Safety instructions

SFSMT-EN-181-0100

Safety instructions

Contents

CE marking i

1. Warning labels ii

1.1 Warning label format and mark description ii

1.1.1 Warning label format ii

1.1.2 Mark description iii

2. Label positions iv

3. Safety xiii

3.1 To ensure safety xiii

3.1.1 Defining safety xiii

3.1.2 Causes of injuries and accidents xiii

3.2 Using safety gear xiii

3.3 Restrictions on machine use xiv

3.3.1 Defining the operator and service personnel xiv

3.3.2 Restricting machine operation with passwords xiv

3.3.3 Lock out the main switch and the air supply/exhaust switch xiv

3.4 Cautions during machine operation xv

3.5 Cautions during power outages xv

3.6 Cautions regarding ferromagnetic fields xv

3.7 Handling the internal tape cutter xv

3.8 Keeping hands away from moving parts xvi

3.9 Handling solvents (including solder, adhesive and flux) xviii

3.10 Handling the laser xviii

3.11 Handling grease and oil xix

3.12 Handling batteries xix

3.13 Handling heavy objects xix

4. Safety message in this manual xx

Safety instructions

CE marking

This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC

Directive 2014/30/EU (description A2 below).

However, this equipment does not bear CE marking if a custom order item was installed.

A1.

Cautions regarding the official language of EU countries and the language used in operation

manuals, CE declarations, operation screen characters, and warning labels when this equipment is

installed in an EU country.

• All materials except warning labels are written in English only.

NOTE

Warning labels only have pictograms or else include warning messages in English, Chinese, Korean and Japanese

language.

A2.

EMC description

• Electromagnetic immunity (Immunity)

Complies with test standards as specified by EN 61000-6-2.

• Electromagnetic emissions (Emission)

Complies with test standards for ISM category: Group 1, Class A, as specified by EN 55011.

NOTE

Class A equipment is intended for use in industrial environments. If used in other environments, ensuring

electromagnetic compatibility (EMC) might be difﬁcult. Refer to EN 55011 standards for detailed information.