YSM40R_Mainte_E.pdf - 第54页
1-20 1 Maintenance 2.4 Required tools Prepare the following tools and items necessary for maintenance. n T ool list : Supplied with machine, : Options Name Description Remarks Phillips screwdriver Large, small Flat-head …
1-19
1
Maintenance
2.3.3 Special tools
n
Special tools (Optional parts)
Special tools
Optional parts
Leaf spring attachment tool
for MU head
ANC nozzle attaching/detaching tool for RS head
Filter insertion tool for RS head
ANC nozzle attaching/detaching tool for MU head
Nozzle lubrication tool
53109-N9-10
Name Part Name Part No. Note
Nozzle lubrication tool NOZZLE TOOL OIL KLF-M88MP-00X
See "How to use the nozzle
lubrication tool (for Type 50X
Series nozzles)" in Chapter 3
for how to use.
ANC nozzle attaching/detaching
tool for MU head
NOZZLE TOOL MU ANC KLF-M88M3-A0X
See "How to detach all
nozzles for MU head" in
Chapter 3 for how to use.
Leaf spring attach tool for MU
head
TOOL,LEAF SPRING KGS-M8810-000
See "About leaf spring
installation tool" in Chapter 6
for how to use.
Filter insertion tool for RS head FILTER INSERT JIG KMB-M3810-00X
See "2.6.1 Inspecting and
replacing the air filters" in
Chapter 3 for how to use.
ANC nozzle attaching/detaching
tool for RS head
NOZZLE TOOL RS ANC KLF-M88M0-A0X
See "How to detach all
nozzles for RS head" in
Chapter 3 for how to use.
n
NOTE
When using the YSM40R, the leaf spring installation tool is dedicated for the MU head. However, this tool can also be
used for other YAMAHA machines.
c
CAUTION
The parts (part Nos.) in this manual are at the time of issuing this manual. The part Nos. may be changed without prior
notice. Make sure to verify the latest part Nos. before ordering.
1-20
1
Maintenance
2.4 Required tools
Prepare the following tools and items necessary for maintenance.
n
Tool list
: Supplied with machine, : Options
Name Description Remarks
Phillips screwdriver Large, small
Flat-head precision screwdriver Large, small
Phillips precision screwdriver
#0, #1 (Used to replace nozzle leaf springs and air
valves.)
Hex wrench set 1 set HEX, WRENCH SET
Grease gun Used to supply grease
Air blow tool Used for cleaning
Ultrasonic cleaner Used to clean nozzle or rotary.
Lubricant syringe for nozzle slide section Used to supply turbine oil (VG32).
Nozzle cleaning wire Used to clean nozzle holes and spline holes.
Vacuum assembly Used to clean feeder plate surface, etc.
n
Other tool list
: Supplied with machine, : Options
Name Description
Cleaning paper Use lint-free cleaning paper or cloth that does not leave dust or residue.
Square cloth Used to prevent parts from being lost or contaminated. (2 sheets)
Cleaning alcohol IPA (isopropyl alcohol) is recommendable.
Paper cup or tray Used to clean spline shaft.
Petri dish Contains grease for RS head shaft.
Cotton swab (15 cm) Used to clean camera lens, half mirror and lighting unit.
Lens cleaner Used to clean camera lens and lighting unit.
Lens blower brush Used to clean camera lens and lighting unit.
Cleaning kit Used to clean spline shaft.
Filter insertion tool for RS head Used to attach multiple RS head filters at once.
ANC nozzle attaching/detaching tool
for RS head
Used to attach or detach ANC nozzle when cleaning RS head nozzles.
Jig for greasing RS head Used to greasing RS head shaft.
Leaf spring attachment tool for MU head Used to attach MU head leaf spring.
Nozzle lubrication tool Used to lubricate nozzle spring action section.
ANC nozzle attaching/detaching tool
for MU head
Used to attach or detach ANC nozzle when cleaning MU head nozzles.
n
Safety gears
Name Description
Dust-proof goggles
Always wear goggles and mask when using alcohol, such as IPA or an air blow.
Dust-proof mask
Safety gloves Wear when handling grease as needed.
Chapter 2 Daily maintenance items
Contents
Before beginning work 2-1
Detaching tape cutter duct 2-3
1. Checking the nozzle 2-4
1.1 Checking with software 2-4
1.1.1 Vacuum level when nozzle is open 2-8
1.2 Checking the nozzles visually 2-9
2. Cleaning the feeder plate 2-11
3. Checking tape cutter sharpness 2-12