YSM40R_Mainte_E.pdf - 第30页
The instruction manual of this machine is written for those who operate this machine. Please read this manual carefully for correct operations and pay special attention to safety precautions. After reading through this m…
4. Lubricating points/schedule (cATS) 5-13
4.1 AZ-axis 5-13
4.2 AH-axis 5-14
4.3 Pickup station and others 5-15
4.4 Both sides of cATS 5-16
Chapter 6 How to replace consumable parts
1. Replacing the leaf spring and roller lock 6-1
1.1 Replacing nozzle leaf springs (MU head) 6-1
1.2 Replacing nozzle leaf springs (FL head) 6-3
1.3 Replacing the roller lock (FL head) 6-4
2. Replacing conveyor belt 6-5
2.1 Replacing the conveyor belt 6-5
3. Replacing the nozzle tip 6-8
3.1 Replacing nozzle tip and spring 6-8
3.2 Replacing nozzle O-ring 6-9
Appendix
1. Specifications A-1
1.1 Air regulator unit A-1
1.2 Power connection terminals A-2
1.3 Connection between machines A-3
1.3.1 PREVIOUS INTERFACE connector A-3
1.3.2 NEXT INTERFACE connector A-4
2. Maintenance parts A-5
2.1 YSM40R main unit maintenance parts list A-5
2.2 Tray component supply unit maintenance parts list A-14
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii
i
Introduction
1. About this manual
Descriptions in this manual stress important maintenance items that are essential for maintaining equipment
performance. Information given here mainly describes making inspections, cleaning and greasing as well as
procedures for replacing consumable parts in each location given in a step-by-step format. This manual is
comprised of the following chapters.
Chapter 1 Maintenance
Describes operating conditions and environments necessary to maintain the machine performance, and the importance
of the daily check work and cleaning work. Setups to make before starting maintenance work, consumable parts and
maintenance tools as well as the necessary tools are also described
Chapter 2 Daily maintenance items
Making checks and cleaning the machine are essential daily maintenance tasks for maintaining equipment performance.
Performing these tasks prevents unforeseen trouble and allows using the machine in an optimum state.
Chapter 3 Periodic maintenance items
Describes maintenance tasks that should be performed periodically to maintain equipment performance. Includes
periodic maintenance intervals such as for "weekly", "monthly", "3-month", "6-month" and "1-year" maintenance tasks.
Chapter 4
Maintenance of options
Describes the maintenance of options (ionizer, UPS battery, cATS, and nozzle station) for this machine.
Chapter 5
Lubricating points
This chapter provides information regarding the lubrication points, tools, and schedule for the axes described in Chapter
3 "Periodic maintenance items" and Chapter 4 “Maintenance of options”.
Chapter 6 How to replace consumable parts
Describes how to replace parts subject to wear, such as nozzle leaf springs and conveyor belts.
w
WARNING
ALWAYS THOROUGHLY READ "SAFETY INSTRUCTIONS" STATED AT THE BEGINNING OF THIS DOCUMENT BEFORE STARTING
THE MAINTENANCE WORK.