00197001-04_UM_Smart_Pin_Support_X-Series-S_SX12V2_DE_EN.pdf - 第112页
6 Restrictions 112 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura- tion 05/2019
6 Restrictions
User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
111
6 Restrictions
●
SIPLACE Pro does not check if the support pin positions are valid at the station.
●
The combination of Smart Pin Support with LBO and PCB Barcode mode is only possible if
the support pin positions do not change.
●
In PCB Barcode mode combined with Smart Pin Support, the support pin positions can be
changed. However, in this case the productivity will be reduced, because the placement
machine must run empty before. If the same support pin list is used for the different boards,
the support pins will not be moved.
●
Virtual PCB Stack is not supported.
For more machine-specific restrictions, read the applicable assembly instructions
●
Assembly instruction "Smart Pin Support option for SIPLACE SX1/SX2 V2" [DE+EN:
00197002‑xx]
●
Assembly instructions "Smart Pin Support option for SIPLACE X-Series S" [DE+EN:
00197394‑xx]
6 Restrictions
112 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019