00197001-04_UM_Smart_Pin_Support_X-Series-S_SX12V2_DE_EN.pdf - 第62页
62 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura- tion 05/2019 Contents 5 Sample Applications .. 105 5.1 Support pin placement .. 105 5.1.1 Not enough supp…
61User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
Contents
Contents
1 Introduction.. 63
1.1 Safety Instructions.. 63
1.1.1 Conventions for the use of safety instructions and symbols.. 63
1.2 Brief Description.. 64
1.3 System Requirements.. 65
1.4 Release History.. 65
1.5 Document Structure.. 65
1.6 Online Help Files.. 65
1.7 SIPLACE on the World Wide Web (WWW).. 66
2 Starting Hardware and Software.. 67
2.1 Performing Calibration.. 69
2.1.1 Calibrating Pin Picker, Lifting Table(s) and Pin Magazine(s).. 70
2.1.2 Handling Error Cases.. 72
3 Configuring Smart Pin Support in SIPLACE Pro.. 73
3.1 Configuring Smart Pin Support in the Setup Editor .. 74
3.2 Defining Support Pin Positions in the Board Editor .. 76
3.2.1 Pin Support Tab.. 76
3.2.2 Defining Support Pin Positions.. 79
3.2.2.1 Defining Support Pin Name.. 80
3.2.2.2 Defining X-/Y-Positions.. 81
3.2.2.3 Defining Support Pin Type.. 82
3.2.2.4 Displaying Underside in 2D.. 83
3.2.2.5 Automatical Collision Check.. 84
3.2.2.6 Defining Production Parameters.. 86
3.2.2.7 Defining Tolerance Radius.. 87
3.2.2.8 Saving Support Pin List.. 87
3.2.3 Adding Board Side.. 88
3.2.4 Linking Multiple Boards To Each Other.. 89
3.3 Checking Production Parameters in the Recipe Editor.. 90
3.3.1 Setting Production Parameters.. 90
3.4 Download to the Station.. 94
4 Working with Smart Pin Support at the Station.. 95
4.1 Smart Pin Support Setup View.. 95
4.2 Checking the Support Pin Positions – Setting Time Interval.. 97
4.3 Handling Error Cases.. 98
4.3.1 Pin Picker Defective.. 98
4.3.2 Support Pin outside the Tolerance Radius.. 99
4.4 Testing Placement Head with Pin Picker Manually.. 100
62 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
Contents
5 Sample Applications.. 105
5.1 Support pin placement.. 105
5.1.1 Not enough support pins.. 105
5.1.2 Support Pin Is Missing on the Lifting Table.. 106
5.2 Smart Pin Support and Long Board Option - (LBO).. 108
5.3 Smart Pin Support and PCB Barcode Mode.. 110
6 Restrictions.. 111
1 Introduction
1.1 Safety Instructions
User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
63
1 Introduction
These instructions describe the configuration and operation of the Smart Pin Support function at
the SIPLACE© SX1/SX2 V2 and SIPLACE X-Series S placement machines (except for SIPLACE
X2 S).
1.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the instruction manualof our machine for
all work!
1.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.