00197001-04_UM_Smart_Pin_Support_X-Series-S_SX12V2_DE_EN.pdf - 第99页
4 Working with Smart Pin Support at the Station 4.3 Handling Error Cases User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura- tion 05/2019 99 4.3.2 Support Pin outsi…
4 Working with Smart Pin Support at the Station
4.3 Handling Error Cases
98 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
4.3 Handling Error Cases
If some conditions are not met, to perform a Smart Pin Support job at the station, the operator must
decide how to continue. For example, this applies in the following cases:
●
The Smart Pin Support function is not installed at this station or is installed but deactivated.
●
Not enough support pins are available in the pin magazines
(see chapter 5 "Sample Applications" [}105]).
●
A support pin is missing at the expected position on the lifting table
(see chapter 5 "Sample Applications" [}105]).
●
A support pin is missing in a garage.
●
There are more support pins available in the machine than available garages (i.e. on lifting
table + in the pin magazines + in the pin picker).
●
A support pin can not be picked up.
●
A support pin can not be placed.
●
The support pin type is incorrect.
In these cases, detailed error messages with the appropriate guidance will be displayed on the GUI
of the station software. More information can be found in the Online Help for the station software.
4.3.1 Pin Picker Defective
If the pin picker is defective, it has to be deactivated in the Machine configuration.
► Highlight the installed pin picker in the Machine configuration (see chapter 2 "Starting Hard-
ware and Software" [}67]) and click on the Edit button.
Fig.40: Deactivating defective pin picker
► Select Installed (but disabled).
► Click on the Accept button.
4 Working with Smart Pin Support at the Station
4.3 Handling Error Cases
User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
99
4.3.2 Support Pin outside the Tolerance Radius
If the support pin is present outside the tolerance radius, a corresponding message is displayed
and an inspection has to be performed.
► Navigate to Settings – Machine options – Inspection.
The following dialog box is displayed:
Fig.41: Inspection - Tolerance radius exceeded
► Click on the Inspect in processing area (Default) button (1) beside the If support pin toler-
ance is exceeded: field.
The boards remain at the corresponding position in the line for inspection.
4 Working with Smart Pin Support at the Station
4.4 Testing Placement Head with Pin Picker Manually
100 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
4.4 Testing Placement Head with Pin Picker Manually
Under Manual operations the placement head with installed pin picker can be tested manually. To
do so, the Machine service or SIPLACE Service activity levels are required.
NOTICE
Please note:
► This function can only be performed if there is no board in the machine.
► The function can only be performed for single support pins.
► Switch to one of the required activity levels.
► Select Manual operations – subsystems.
The following dialog box is opened.
Fig.42: Manual operations – subsystems (sample SX2)
► Click on the Pin picker button (1).
The following dialog box is opened.