00197001-04_UM_Smart_Pin_Support_X-Series-S_SX12V2_DE_EN.pdf - 第84页
3 Configuring Smart Pin Support in SIPLACE Pro 3.2 Defining Support Pin Positions in the Board Editor 84 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura- tion 05…
3 Configuring Smart Pin Support in SIPLACE Pro
3.2 Defining Support Pin Positions in the Board Editor
User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
83
3.2.2.4 Displaying Underside in 2D
Fig.24: Support pins 2D view top side
Fig.25: Support pins 2D view underside
The positions of the components and the support pins are visible in this view. By clicking on the
button (1) you switch the view of the board sides (top side / underside respectively).
► Check the positions of the single support pins. For this, also switch the view from top side to
underside and vice versa to detect potential conflicts.
► If you want to change the position of a support pin, click on the support pin and drag it to the
desired position.
NOTICE
Activating Drag & Drop
If Drag & Drop does not work for the support pins, activate the Drag & Drop for Support
Pins option in the Tools – Settings – Options menu.
3 Configuring Smart Pin Support in SIPLACE Pro
3.2 Defining Support Pin Positions in the Board Editor
84 User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
3.2.2.5 Automatical Collision Check
Potential pin collisions with components, conveyor rails or other support pins can be checked in the
Pin Support tab of the Board Editor.
The following values / parts are used for the collision checks:
●
for components:
Support pin tolerance
●
for long board:
Stopper offsets (adjustable in the tool bar)
●
for conveyor rails:
Support pin base
Processing orientation (adjustable in the tool bar)
●
for other support pins:
Base
Fig.26: Automatical collision check
► Click on the Check button (1).
The parameters used for the simulated processing orientation and for the stopper offset (2) are dis-
played (adjustable in the tool bar).
After the check, a collision status (3) is displayed for each support pin:
(+) if no collision was detected
(-) if at least one collision exists. A detailed description is displayed in the message window.
► Click on the Messages … button (4) to display explanatory information to all collision events.
The collision check checks the selected board and all boards with the checkmark "Use" in the dia-
log (see 3.2.4 "Linking Multiple Boards To Each Other" [}89]).
Changes are not valid until the board has been closed and reopened.
3 Configuring Smart Pin Support in SIPLACE Pro
3.2 Defining Support Pin Positions in the Board Editor
User Manual / Bedienungsanleitung SIPLACE X-Series S, SX1/SX2 V2 Smart Pin Support Operation and Configura-
tion 05/2019
85
Visual Collision Check
The collision events are displayed in red in the graphic.
Fig.27: Support pin: Visual collision check – it should NOT look like that
By clicking on the
button (1), the conveyor rails(2), the pin bases and the components are
displayed. In the figure above it is visible that a pin base(3) collides with a conveyor rail to the
right.
► Move the support pins so that the pin bases do not collide with other pin bases, components
or conveyor rails.
If necessary, you may change the processing orientation of the board for the collision check.
► Select the desired rotation from the drop down list to the right of the
button (1).
Thereafter, the board and the conveyor rails (2) are displayed in the selected direction.