00191369-01.pdf - 第113页
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts Software Version S R.501.xx Edition 01/99 3.3 User Interface - Views and M enus 111 NOTE The followi ng 6 me nu options belong t o the gr oup of si ngle f unc…
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
110
9LHZ0HQX
The "View" menu contains the options for calling the placement functions, single functions and
vision functions. It is also used to start the SITEST test program and call the view for running
the GEM functions.
Å Click the required menu option.
The screen display is switched to the corresponding view in which you can then call the
necessary functions.
NOTE
All the options in this menu can also be called by clicking the corresponding toolbar button
(see section 3.2.2.2) or by pressing the corresponding function key. If shortcuts have been
defined, these can also be used.
NOTE
The 3 menu options below belong to the group of placement functions.
6HWXS )
The setup for a feeder location is displayed in tabular form. It can be called separately for each
of the four locations.
The procedure is described in more detail in Chapter 4 "Placement Functions".
(UURUV )
Errors are differentiated by type and each error type is presented in a separate table. You can
call separate tables for track errors, conveyor errors, machine errors and general errors.
The last error to have occurred is always displayed at the top of the table. Identical errors are
cumulated in the error counter ("#E" column).
The procedure is described in more detail in Chapter 4 "Placement Functions".
)HHGHUV )
Here you can use a variety of functions to display and fill empty tracks for linear feeders or to
display and modify inventory levels for trays and wafflepack changers.
The procedure is described in more detail in Chapter 4 "Placement Functions".
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
111
NOTE
The following 6 menu options belong to the group of single functions.
The single functions are used to execute specific actions following fatal errors as well as to set
up and test the machine since they allow you to address the various functional modules in a
defined manner.
Execution of the single functions is described in Chapter 5 "Single Functions".
*DQWU\ )
This allows you to call the single functions for gantry 1. These functions can be used, for
example, to test the revolver head functions.
NOTE
Each of the 4 gantries can be addressed separately.
The functions are identical for all the gantries.
*DQWU\ )
Single functions for gantry 2
*DQWU\ 6KLIW
Single functions for gantry 3
*DQWU\ 6KLIW
Single functions for gantry 4
7UDQVSRUW)
Single functions for PCB conveyor 2 (= left conveyor track in the case of twin conveyors)
NOTE
The single functions for Conveyor 2 cannot be called unless twin conveyors are configured.
The functions are identical to the functions for Conveyor 1.
7UDQVSRUW)
Used to call the single functions for PCB conveyor 1 (= right conveyor track in the case of twin
conveyors). These are used to test and set the functional modules for PCB conveyor as well
as to set the conveyor width.
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
112
NOTE
The next two menu options belong to the group of vision functions.
These functions are used to teach and test fiducials, measure components and change
package form data.
The vision functions cannot be executed at the "Operator" access level.
7HDFKILGXFLDO)
This menu item is used to call the functions for the processing of fiducials for PCB position
detection.
For a more extensive description of the procedure refer to Chapter 6 "Vision Functions".
7HVWFRPSRQHQW)
This menu item is used to call the functions for the processing of package forms for component
centering.
For a more extensive description of the procedure refer to Chapter 6 "Vision Functions".
6WDUW6,7(67)
This automatically starts the SITEST test program for machine set-up and calibration.
The user interface, together with the procedure for the execution of the functions, is described
in the separate User’s Manual for the SITEST test program.
NOTE
The SITEST test program cannot be started from the "Operator" access level.
*(0 )
This menu item is used to call the GEM interface functions.
For a more extensive description of the procedure refer to Chapter 13.
NOTE
The GEM interface functions cannot be called unless the GEM interface has been configured.
At the "Operator" access level, only the function "Send and receive messages" is available.
The GEM interface functions are not available in the current software version.