00191369-01.pdf - 第119页
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts Software Version S R.501.xx Edition 01/99 3.3 User Interface - Views and M enus 117 &RQWURO 0R GHV 6W DQGDORQH (for t est pur pose s onl y) This con…
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
116
([DPSOHIRU WKHPRGLILFD W L RQ RIDQH[LVWL QJ SDVVZRUG
Å Click the "Old password" text box and enter the current password.
The other two text boxes now become active.
Å Click the "New password" text box and enter the new password.
Å Click the "Confirm password" text box and re-enter the new password.
Å Click the 2. button to confirm the password.
Å Click 2. to close the "Access level" dialog box.
&RQWUROPRGH
The control mode determines how the station is supplied with the necessary placement data.
Å Click the menu item &RQWUROPRGH
The "Control mode" dialog box is displayed.
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
117
&RQWURO 0R GHV
6WDQGDORQH(for test purposes only)
This control mode allows you to load a cluster (placement program) for test and service
purposes from the station computer using the menu item "New cluster..." .
The necessary data must be located on the station computer’s hard disk.
*(0+RVW
In this control mode, clusters can only be specified by the host computer.
The necessary data must be located on the host computer’s hard disk.
NOTE
This setting must be activated if you want to download cluster data from the host computer to
the station computer via the GEM interface. The procedure for doing this is described in
Chapter. 13.
This control mode cannot be set in the current software version since the "GEM Interface"
option has not yet been implemented.
/LQH&RPSXWHU
If a cluster has been prespecified at the station, all the necessary associated data is loaded
from the line computer. The data must be located on the line computer’s hard disk.
NOTE
By default, clusters and set-ups should be prespecified by the line computer.
If the line computer is powered down via "Shut down" and then rebooted, all the connected
stations must also be rebooted.
6,3/$&(3UR
This control mode cannot be set in the current software version.
Å Activate the radio button for the required control mode.
Å Click 2. to make your settings active.
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
118
1HZFOXVWHU
In the "Stand alone" control mode, you can load the data for a selected cluster from the
station computer’s hard disk.
Å Click the menu item 1HZFOXVWHU
Å Now enter the name of the required cluster in the displayed text box and click 2. to
confirm. The cluster data is now loaded.
NOTE
The data, including the fiducial and package form data, of the last cluster successfully
prespecified by the line computer, is now saved on the station computer’s hard disk under the
cluster name "AKTUELL" and can be loaded by entering this name.
6RIWZDUH
This menu item is used to activate the test commands (test functions) for checking a variety
of machine components.
NOTE
This menu item can only be called from the "Service" access level.
DANGER
Settings for test commands and test command execution should be performed by service
engineers only.
Å Click the menu item 6RIWZDUH
The following window is opened.