00191369-01.pdf - 第118页
3 Introduction and Basic Concepts User’ s M anual SIPLACE HS -50 3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99 116 ([DPSOHIRU W KHPRGLILFD W L RQ RI DQH[LVWL QJ S DVVZRUG Å Clic…
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
115
Å Click the menu item $FFHVVOHYHO
The "Access level" dialog box is opened.
Å Click the radio button for the required access level.
Å Click the "Change password" button to the right of the access level if you want to allocate
a password or change an existing password.
The dialog box for password entry is now displayed.
([DPSOHRILQLWLDOSDVVZRUGDOORFDWLRQ
Å Click the "New password" text box and enter the required password.
Å Click the "Confirm password" text box and re-enter the password.
Å Click the 2. button to confirm the password.
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
116
([DPSOHIRU WKHPRGLILFD W L RQ RIDQH[LVWL QJ SDVVZRUG
Å Click the "Old password" text box and enter the current password.
The other two text boxes now become active.
Å Click the "New password" text box and enter the new password.
Å Click the "Confirm password" text box and re-enter the new password.
Å Click the 2. button to confirm the password.
Å Click 2. to close the "Access level" dialog box.
&RQWUROPRGH
The control mode determines how the station is supplied with the necessary placement data.
Å Click the menu item &RQWUROPRGH
The "Control mode" dialog box is displayed.
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
117
&RQWURO 0R GHV
6WDQGDORQH(for test purposes only)
This control mode allows you to load a cluster (placement program) for test and service
purposes from the station computer using the menu item "New cluster..." .
The necessary data must be located on the station computer’s hard disk.
*(0+RVW
In this control mode, clusters can only be specified by the host computer.
The necessary data must be located on the host computer’s hard disk.
NOTE
This setting must be activated if you want to download cluster data from the host computer to
the station computer via the GEM interface. The procedure for doing this is described in
Chapter. 13.
This control mode cannot be set in the current software version since the "GEM Interface"
option has not yet been implemented.
/LQH&RPSXWHU
If a cluster has been prespecified at the station, all the necessary associated data is loaded
from the line computer. The data must be located on the line computer’s hard disk.
NOTE
By default, clusters and set-ups should be prespecified by the line computer.
If the line computer is powered down via "Shut down" and then rebooted, all the connected
stations must also be rebooted.
6,3/$&(3UR
This control mode cannot be set in the current software version.
Å Activate the radio button for the required control mode.
Å Click 2. to make your settings active.