00191369-01.pdf - 第116页
3 Introduction and Basic Concepts User’ s M anual SIPLACE HS -50 3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99 114 NOTE At "Operat or" a ccess level, i t is o nly pos sible to ac…
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
113
2SWLRQV0HQX
The "Options" menu is only available in the main view. This menu contains all the supple-
mentary functions.
Å Click the required menu item and then make the appropriate settings or selections in the
corresponding windows or dialog boxes.
0DFKLQHRSWLRQV
Depending on access level, you can obtain information about the station configuration
("Operator") or activate or deactivate the displayed machine options ("Line engineer",
"Service").
Å Click the menu item 0DFKLQHRSWLRQV
The following window is displayed.
NOTE
Only those machine options are displayed which are configured at the current station.
The different machine options and the associated functions are described in Chapter 4
"Placement Functions", Chapter 6 "Vision Functions" and chapter 13 "Station Extensions/
Software“.
Å Click the checkboxes corresponding to the machine options which you want to activate or
deactivate.
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
114
NOTE
At "Operator" access level, it is only possible to activate and deactivate the conveyor interface
options.
Å If you want to activate or deactivate the options for a processing area or view its configu-
ration, click the 3URFHVVLQJDUHD or 3URFHVVLQJDUHD tab to select the required area.
The display switches to the selected processing area (see example below for PA1).
Å Check/uncheck the boxes corresponding to the required machine options.
Å Click $FFHSW to save the settings.
$ FFHVVOHYHO
It is possible to protect some user interface functions against unauthorized use by setting an
access level and allocating a password. Functions which are not accessible from a given
access level cannot be executed since the associated pushbuttons, radio buttons and menu
commands are either inactive or not displayed.
You can choose between the access levels "Operator", "Line engineer" and "Service".
Passwords can be allocated for the access levels "Line engineer" and "Service".
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
115
Å Click the menu item $FFHVVOHYHO
The "Access level" dialog box is opened.
Å Click the radio button for the required access level.
Å Click the "Change password" button to the right of the access level if you want to allocate
a password or change an existing password.
The dialog box for password entry is now displayed.
([DPSOHRILQLWLDOSDVVZRUGDOORFDWLRQ
Å Click the "New password" text box and enter the required password.
Å Click the "Confirm password" text box and re-enter the password.
Å Click the 2. button to confirm the password.