00191369-01.pdf - 第339页
User’s Manual SIPLACE HS-50 7 What schould you do ... Software Vers ion SR.501.xx E dition 01/99 7.11 Operator profile 337 2SHUDWRUSU RILOH The operat ing pers onnel ar e to be as signe d the follo wing ta sks: – …
7 What schould you do ... User’s Manual SIPLACE HS-50
7.10 Tools for the operator Software Version SR.501.xx Edition 01/99
336
7RROVIRUWKHRSHUDWRU
All operators are to be equipped with the tools listed in the following. It is recommended to store
the tools in an appropriate container to avoid being injured when removing the tools from the con-
tainer (i.e. by a pair of tweezers).
Every operator of the machine requires:
– SMD tweezers
– A brush with short bristles to clean the component tables
– A set of small regular and Phillips-head screwdrivers
– A tape splicing clamp and splicing materials
– Scissors for splicing tape (do not use multi-purpose scissors or diagonal cutters)
– Erasers or fiberglass pens to remove fiducials
– Indelible pens for marking the tracks
– Cleaning agents (ethyl alcohol, Plexiglass cleaner, cotton wool tips, lint-free cloths, pipe-
cleaners)
– WD40 corrosion protection
– Vacuum cleaner
User’s Manual SIPLACE HS-50 7 What schould you do ...
Software Version SR.501.xx Edition 01/99 7.11 Operator profile
337
2SHUDWRUSURILOH
The operating personnel are to be assigned the following tasks:
– Supplying the feeder module with sufficient components
– Checking to make sure that the right components are placed in the feeder modules
– Promptly refilling the components and splicing the tapes
– Checking to make sure that the components are in their correct pick-up positions (see
Fig. 7.8 - 1
)
– Checking the flow of material to the PCBs on the input and output conveyor
– Checking the quality of the PCBs
– Random sampling of the PCBs before they enter the soldering furnace.
– Observing the EGB regulations
– Avoiding errors (see sections 7.7.1
and 7.7.2)
– Noting error displays and messages on the station and notifying the line engineer, if necessary
– Carrying out the maintenance work specified in the User Manual
7 What schould you do ... User’s Manual SIPLACE HS-50
7.12 Line engineer profile Software Version SR.501.xx Edition 01/99
338
/LQHHQJLQHHUSURILOH
The line engineers should normally have attended the SIPLACE basic training course and are to
be assigned the following tasks:
– Acting as a contact for the operators
– Maintaining the machine log book
– Monitoring and carrying out maintenance at the specified intervals
– Monitoring the workplace to ensure that it is clean and safe
– Monitoring conformity with EGB regulations
– Carrying out quality control
– Following up and reporting fault messages
– Making sure that errors have been eliminated
– Providing all materials required to produce the job in a timely manner, such as
–PCBs
–Soldering paste
–Components
–Feeder modules, etc.
– Setting up the station for a new production batch
– Checking the settings of the feeder modules
– Checking the management data
– Asking the responsible programmers to modify placement programs
– Ensuring a smooth flow of information between the individual groups
r