00191369-01.pdf - 第420页
12 Station Extensions - Software User’s Manual S IPLACE HS-50 12.2 GEM Interface Software Version SR.501.xx Edition 01/99 418 0 HVVDJHV Å In th e "S tate" view , c lick the button. The user inte rfac…
User’s Manual SIPLACE HS-50 12 Station Extensions - Software
Software Version SR.501.xx Edition 01/99 12.2 GEM Interface
417
NOTE
Depending on the selected action, the corresponding placement program must be available
at the station computer or the host computer.
To download a placement program, the control mode must be set to "GEM Host" (see section
12.2.2.1).
Å Enter the name of the required placement program in the box "Placement Program ID:".
Å Click the corresponding button to "upload" or "download" the corresponding placement
program.
The action is performed and the current status of the action is displayed above the buttons.
12 Station Extensions - Software User’s Manual SIPLACE HS-50
12.2 GEM Interface Software Version SR.501.xx Edition 01/99
418
0HVVDJHV
Å In the "State" view, click the button.
The user interface switches to the following view.
The display area is subdivided into separate fields which contain the tools necessary to per-
form the actions described below.
User’s Manual SIPLACE HS-50 12 Station Extensions - Software
Software Version SR.501.xx Edition 01/99 12.2 GEM Interface
419
+RVWPHVVDJH'LVSOD\)LHOG
This display field displays the messages received from the host computer.
The last message to be received appears at the bottom of the message list.
Å Once you have read the message, click the $ FNQRZOHGJH button. Confirmation is then
sent to the host computer that the message has arrived and been read.
2SHUDWRUPHVVDJH'LVSOD\)LHOG
In this field you can enter the messages which are to be sent to the host computer.
Å Enter the required message (max. 160 characters).
Å Click the 6HQG button.
The message is now sent to the host computer.
NOTE
The last message to have been written and sent to the host computer is always displayed in
the text box.
r