00191369-01.pdf - 第167页

User’s Manual SIPLACE HS-50 5 Single Functions Software Version S R.501.xx Edition 01/99 5.2 Single functions, Gantry 165 59KHDGLQ GH[LQJ  This func tion is u sed to mov e the re volver head. Å Click t he 59KHDG LQG…

100%1 / 442
5 Single Functions User’s Manual SIPLACE HS-50
5.2 Single functions, Gantry Software Version SR.501.xx Edition 01/99
164
$OOQR] ]OH V 
If this radio button is activated, the selected function i.e."Return", "Pick up" or "Remove" is car-
ried out for all nozzles on the revolver head.
Å Activate the $OOQR]]OHVradio button.
Å Click the button for the required function.
The function is carried out for all functions on the revolver head.
5HWXUQ
When this function is activated, the nozzles are returned to the correct magazine of the nozzle
changer (or the nozzle on the selected segment is returned to its magazine).
Å Click the 5HWXUQbutton.
If the "All nozzles" radio button is activated, the function is carried out immediately.
If the "One nozzle" radio button is activated, a dialog box is opened for you to enter the
number of the required segment (see page 5 - 163
).
5HPRYH
When this function is activated, all nozzles or the nozzle on the specified segment are dis-
carded into the reject container.
Å Click the 5HPRYHbutton.
If the "All nozzles" radio button is activated, the function is carried out immediately.
If the "One nozzle" radio button is activated, a dialog box is opened for you to enter the
number of the required segment (see page 5 - 163
).
3LFNXS
When this function is activated, nozzles specified for current use are picked up from their
respective magazines (or a nozzle is picked up for the specified segment).
Å Click the 3LFNXSbutton.
If the "All nozzles" radio button is activated, the function is carried out immediately.
If the "One nozzle" radio button is activated, a dialog box is opened for you to enter the
number of the required segment (see page 5 - 163
).
5HSODFH
This function is used to replace the nozzle on the specified segment with one of the same
type.
Å Click the 5H SODFH button.
A dialog box opens to allow you to enter the segment number.
(The rest of the procedure is described on page 5 - 163
).
User’s Manual SIPLACE HS-50 5 Single Functions
Software Version SR.501.xx Edition 01/99 5.2 Single functions, Gantry
165
59KHDGLQGH[LQJ
This function is used to move the revolver head.
Å Click the 59KHDGLQGH[LQJbutton.
The revolver head is moved on one segment.
The current positions of the segments are shown in the graphic.
&RQILUP
This function allows you to confirm that a nozzle has been changed (without nozzle changer).
To change a nozzle without a nozzle changer you must perform the operation by hand. You
can only change the nozzle on one segment at a time because the segment must be in the
changeover position. By turning the head in a clockwise fashion you can bring each segment
in turn to the changeover position.
Å In the table, find the segment for which the nozzle is to be changed.
Å Click the 59KHDGLQGH[LQJbutton as often as required to bring the required segment
round until it is displayed in the changeover position (marked with an arrow).
The table entry for this segment is now highlighted in light blue (see Fig. 5.2 - 5
).
Å Remove the nozzle by hand and replace it with a nozzle of the type shown in the "Preset"
column.
Å Click the &RQILUP button.
The change is confirmed. The entries in the columns "Actual" and "Preset" agree. The new
nozzle configuration is saved to the machine data.
5 Single Functions User’s Manual SIPLACE HS-50
5.2 Single functions, Gantry Software Version SR.501.xx Edition 01/99
166
 1R]]OHFKDQ JHUFRQILJXUDWLRQUHYROYHUKHDGVFUHHQ
Å In the current screen for the single function for Gantry x, click the symbol .
NOTE
The nozzle changer must be installed and configured in the machine options.
The user interface is switched to the "Nozzle changer configuration revolver head" screen
(see Fig. 5.2 - 6
).