00191369-01.pdf - 第132页
4 Placement Functions User’s Manual SIPLACE HS -50 4.1 Setup Display Software Version SR.501.xx Edition 01/99 130 $ FFHSW DEOH %DUFRGHV The list of barcode s (max . of 6) that are kno wn for the c ompon ent in t…
User’s Manual SIPLACE HS-50 4 Placement Functions
Software Version SR.501.xx Edition 01/99 4.1 Setup Display
129
Å Select the entry in the setup table for the track for which you want to execute a component
verification (or read the track barcode on the barcode bar using the barcode reader). The
line selected is highlighted in light blue in the table.
Å Click on the &RPSYHULILFDWLRQZLWKEDUFRGH button
The following window is opened. The data for the selected track is displayed so you can
check the data.
Å Read the component barcode in from the corresponding component reel with the
barcode reader. The barcode read in is displayed in the "Barcode:" line (see Fig. 4.1 - 3
).
NOTE
If the component barcode cannot be read in, then enter it manually. The procedure is
described in Section 4.1.2.2.
4 Placement Functions User’s Manual SIPLACE HS-50
4.1 Setup Display Software Version SR.501.xx Edition 01/99
130
$FFHSW DEOH%DUFRGHV
The list of barcodes (max. of 6) that are known for the component in the selected track is dis-
played with this function.
Å Click on the $FFHSWDEOHEDUFRGHVbutton
The following selection box is opened.
Å Click on the &ORVH button. The selection box is closed.
The barcode read in using the barcode reader is compared to the possible barcodes.
The positions hidden due to the filter (marked by a ¤) will not be used for the comparison.
The results of the barcode comparison will be displayed in the display field of the "Compo-
nent verification with barcode" window (see the following examples).
7KHEDUFRGHVPDWFK
7KHEDUFRGHVGRQRWPDWFK
User’s Manual SIPLACE HS-50 4 Placement Functions
Software Version SR.501.xx Edition 01/99 4.1 Setup Display
131
0DQXDO,QSXWRIW K H&RP SRQHQW%DUFRGHV
Å Click on the 0DQXDOLQSXW button to enter the barcode by hand.
The following input box is opened.
Å Enter the barcode in the input field and close the input box using 2..
The barcode comparison is started.
The results of the barcode comparison will be displayed in the display field of the "Compo-
nent verification with barcode" window (see Section 4.1.2.1
).
Å The further procedure is described in Section 4.1.2.1.