00193922-03.pdf - 第17页
User manual SIPLAC E HF series 1 Introduction Software Vers ion SR.50x.xx 01/2006 US Edition 1.1 Description 17 The hea d modular ity pr inciple allows the plac ement h eads to b e recon figured t o suit c hanging r e- q…
1 Introduction User manual SIPLACE HF series
1.1 Description Software Version SR.50x.xx 01/2006 US Edition
16
1.1 Description
The placement systems from the SIPLACE HF series are particularly suitable for applications that
demand a high level of flexibility, utmost precision and high placement rate. Two placement meth-
ods are used: 1
– the Collect & Place method for high-speed placement of standard components
– the Pick & Place method for fast placement of special fine-pitch and super-fine pitch compo-
nents
1.1.1 HF placement machine
The HF machine has two gantries driven by linear motors. The gantries can be quickly and accu-
rately positioned in the X and Y directions. The gantry arms are lightweight constructions made
from a highly rigid carbon fiber composite material. There is a placement head on each gantry.
The following placement head configurations are possible: 1
Placement areas 1 and 2 1
– 12-segment Collect&Place head or
– 6-segment Collect&Place head or
–TwinHead
1.1.2 HF/3 placement machine
The HF/3 machine also has a third gantry in placement area 1. The following placement head con-
figurations are possible: 1
Placement area 1 1
– two 12-segment Collect&Place heads or
– two 6-segment Collect&Place heads or
– one 6-segment and one 12-segment Collect & Place head
Placement area 2 1
– 12-segment Collect&Place head or
– 6-segment Collect&Place head or
–TwinHead
User manual SIPLACE HF series 1 Introduction
Software Version SR.50x.xx 01/2006 US Edition 1.1 Description
17
The head modularity principle allows the placement heads to be reconfigured to suit changing re-
quirements. 1
The SIPLACE principle 1
The moving head picks up the components from their stationary feeder, and places them on the
PCB, which is also stationary. This proven SIPLACE principle has many advantages: 1
– Short down times for refilling or splicing
– Even the smallest components (e.g. 0201) are picked up reliably
– The components cannot slip on the PCB
– Minimal traversing paths
High flexibility, cost-effectiveness and set-up reliability combine to ensure that the SIPLACE HF
series placement machines provide high productivity. Minimum down times increase utilization
and thus help to increase productivity. 1
1 Introduction User manual SIPLACE HF series
1.2 Serial number of the placement machine Software Version SR.50x.xx 01/2006 US Edition
18
1.2 Serial number of the placement machine
The serial number of the placement machine can be found in two different places. 1
– The serial number, without leading zeroes, e.g. A-1, is struck on the left-hand side of the ma-
chine frame, on the same side as the pneumatic unit (see item 1 in Fig. 1.2 - 1
).
– With leading zeros, e.g. A-001, the serial number is punched in the rating plate (see item 2 in
figure 1.2 - 1
).
1
Fig. 1.2 - 1 Places with the serial number on the machine
1