00193922-03.pdf - 第353页
User manual SIPLAC E HF series 7 Station extensions Software Vers ion SR.50x.xx 01/2006 US Edition 7.15 Long board option 353 7.15 Long boar d option Item no. 001 196 72-xx The foll owing PCB formats can be placed o n th…
7 Station extensions User manual SIPLACE HF series
7.14 SIEMENS interface Software Version SR.50x.xx 01/2006 US Edition
352
7.14 SIEMENS interface
Item no. 00303636-xx
The conveyor interface on the placement machines from the HF series is configured to the
SMEMA standard. It is, however, still possible to use this interface in accordance with the SIE-
MENS standard. This is a significant benefit when an HF series machine is to be integrated into
older SIPLACE lines, in which case it would not be necessary to retrofit the older machines to con-
form to the SMEMA standard.
Simply configure the conveyor interface of the HF series machines to the SIEMENS standard and
connect the machines using the associated interface cable.
More detailed information can be found in the SIEMENS conveyor interface retrofit instructions",
item no. 00194343-01.
User manual SIPLACE HF series 7 Station extensions
Software Version SR.50x.xx 01/2006 US Edition 7.15 Long board option
353
7.15 Long board option
Item no. 00119672-xx
The following PCB formats can be placed on the HF series of machines:
7
7
7
We can supply the "Long board" option as a retrofit kit for placing PCBs that are over 450 mm long.
If the "Long board" option is installed, then the following PCB formats can be processed:
7
7
7
The retrofit kit consists of the following parts:
– Complete mechanism: stopper, sensors, cables and assembly parts
– Optional CD for enabling the function on the SIPLACE Pro computer
– Retrofit instructions
PLEASE NOTE 7
The Long board option must be ordered 2x for the dual conveyor.
More detailed information can be found in the Long board retrofit instructions, item no. 00193888-
01.
Single conveyor 50 x 50 mm² to 450 x 508 mm²
Dual conveyor (standard width) 50 x 50 mm² to 450 x 216 mm²
Dual conveyor "Wide board" 50 x 50 mm² to 450 x 250 mm²
Dual conveyor in "Single conveyor" mode 50 x 50 mm² to 450 x 380 mm²
Dual conveyor in "Single conveyor", "Wide board" mode 50 x 50 mm² to 450 x 450 mm²
Single conveyor "Long board" 50 x 80 mm² to 610 x 508 mm²
Dual conveyor "Long board" 50 x 80 mm² to 610 x 216 mm²
Dual conveyor "Wide board", "Long board" 50 x 80 mm² to 610 x 250 mm²
Dual conveyor in "Single conveyor", "Long board" mode 50 x 80 mm² to 610 x 380 mm²
Dual conveyor in "Single conveyor", "Wide board", "Long
board" mode
50 x 80 mm² to 610 x 450 mm²
7 Station extensions User manual SIPLACE HF series
7.16 Magnetic pin support Software Version SR.50x.xx 01/2006 US Edition
354
7.16 Magnetic pin support
Item no. 00119680-xx
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting magnetic pin supports on the
lifting table.
7
Fig. 7.16 - 1 Magnetic pin support