00193922-03.pdf - 第321页

User manual SIPLAC E HF series 7 Station extensions Software Vers ion SR.50x.xx 01/2006 US Edition 7.4 Component barc ode scanner 321 7.4 Component barcode scanner 7.4. 1 Gener al Item no. 001 196 83-xx With the p laceme…

7 Station extensions User manual SIPLACE HF series

7.3 Component camera for the TwinHead, FC camera Software Version SR.50x.xx 01/2006 US Edition

320

7.3.1.3 Position of the component vision cameras for the TwinHead on the

HF/3 placement machine

Fig. 7.3 - 3 Position of the component vision cameras for the TwinHead on the HF/3 placement machine

(1) Assembly position for the CO vision camera (stationary, P&P (type 22) 50 x 40), location 3

(2) Assembly position for the CO vision camera (stationary, P&P (type 20) 8 x 8), location 3

7.3.2 Safety instructions for the TwinHead component cameras during

a placement head change

WARNING 7

When the placement head is changed from the TwinHead to the Collect&Place head, the Twin-

Head's component vision cameras (stationary, P&P, type 22, 50 x 40, and type 20, 8 x 8) must be

removed, otherwise the Collect&Place head will collide with the camera housings.

User manual SIPLACE HF series 7 Station extensions

Software Version SR.50x.xx 01/2006 US Edition 7.4 Component barcode scanner

321

7.4 Component barcode scanner

7.4.1 General

Item no. 00119683-xx

With the placement system, a barcode scanner can be used to check that the track allocation is

correct and to read component data from component reels. A barcode scanner can be installed

on both of the operator panels on the placement system. A retrofit kit contains two component bar-

code scanners.

Fig. 7.4 - 1 Component barcode scanner

(1) Barcode scanner

Track allocation 7

Four-digit barcode strips are attached to the lateral safety screens for the purposes of track allo-

cation. The first digit is used to identify the component table (1, 2, 3, or 4), while the remaining

7 Station extensions User manual SIPLACE HF series

7.4 Component barcode scanner Software Version SR.50x.xx 01/2006 US Edition

322

three digits specify the track number. There are also return barcodes at both ends of the barcode

strip. The barcode strips are numbered consecutively in intervals of two (1, 3, 5, 7...) and each

represents 2 tracks (barcode 1 = track 1 and 2).

Components 7

Data can be read from the component reels to compare the stock of components against the quan-

tity specified in the set-up file (refill check), for example.

An audible signal is given when each dataset has been read successfully.

PLEASE NOTE 7

The component barcode scanner option must be configured on the SIPLACE Pro computer.

Barcodes that start with the number 1, 2, 3, or 4 and are 4 digits long are interpreted as track bar-

codes. All other barcodes that do not start with number 1, 2, 3, or 4 are regarded as component

barcodes.

7.4.2 Technical data

Component barcode scanner

Max. resolution 0.13 mm

Scanning speed 36 scans/sec.

Laser class Laser class 1

Degree of protection IP 64

Dimensions 225 x 69 x 67 mm³

Weight 380 g

Cable length 2 m

Influence of ambient light Immune to the direct incidence of normal light and the

indirect incidence of sunlight

Operating temperature - 10°C to + 40°C

Atmospheric humidity Max. 90% (non-condensing)

Compatible barcode types Code 39 (normal / FULL ASCII)

EAN/UPC (family with/without ADD ON

CODABAR

INTERLEAVED 2/5

NORMAL 2/5 (5 bars)

(others available upon request)