00193922-03.pdf - 第24页
1 Introduction User manual SIPLA CE HF series 1.8 Revision index Software Vers ion SR.50x.xx 01/2006 US Edition 24 1.8.1 Revis ions since 0 1/2006 e dition 1 New or mod ified Chapter/se ction Warning label s 2.2 Lase r c…
User manual SIPLACE HF series 1 Introduction
Software Version SR.50x.xx 01/2006 US Edition 1.7 EU Declaration of Conformity
23
1.7 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE HF SIPLACE HF/3
Item no.: 119600 119650 1
manufactured by 1
SIEMENS AG, Automation and Drives
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D-81359 Munich 1
conforms to the relevant provisions of: 1
– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on
the approximation of the laws of the Member States relating to machinery
– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility
The product(s) identified above comply with the requirements of the above EU directive by meet-
ing the following standards: 1
EN 294, EN 349, EN 418, EN 811, EN 1050, EN ISO 12100-1, EN ISO 12100-2, EN 60204-
1, EN 60825-1, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8, BGV A1
1)
, BGV A2
1)
1
1.8 Revision index
1
1
1) National specifications
This declaration certifies the compliance with the indicated directives but implies no warranty of properties.
The safety instructions of the accompanying product documentation shall be observed.
Manual Software version Edition
Preliminary user manual 5.05 11/2003 DE
First edition User manual 5.05 05/2004 US
Revision User manual 5.05 07/2004 US
Revision User manual 5.0x 01/2006 US
1 Introduction User manual SIPLACE HF series
1.8 Revision index Software Version SR.50x.xx 01/2006 US Edition
24
1.8.1 Revisions since 01/2006 edition
1
New or modified Chapter/section
Warning labels
2.2
Laser classification 2.3
Safety instructions for operating the machine 2.5
Protective covers and cover flaps 2.6.1
Switches and buttons on the placement machine 2.6.2
Emergency stop loops and signaling circuit 2.6.4
Residual voltages and discharge times in the machine 2.7
Energy state of the machine after switching off at the main power switch 2.9
Performance data for the machines 3.2
Ratings of the placement system 3.3
Dimensions and weight of the placement machines 3.4
Placement heads 3.7
Setting up and commissioning 4
Personnel profile 5.1
Feeder modules 6.1
Technical data for the S feeder modules 6.2
Nozzle changer for the SIPLACE TwinHead 7.1.3
Sensor for the component reject bin 7.2
SIPLACE High-Force Head 7.7
Optional mechanical stopper 7.9
User manual SIPLACE HF series 1 Introduction
Software Version SR.50x.xx 01/2006 US Edition 1.9 Abbreviations
25
1.9 Abbreviations
1
1
C&P 1 Collect&Place 1
C&P12 1 Collect&Place head with 12 segments 1
C&P6 1 Collect&Place head with 6 segments 1
CO 1 Component 1
DC 1 Dual conveyor 1
DCA 1 Direct chip attach 1
EGB 1 Electrostatically-sensitive group of components 1
ESD 1 Electrostatic sensitive device 1
FC 1 Flip chip 1
GND 1 Ground 1
IC 1 Integrated circuit 1
MC 1 Machine controller 1
MTC 1 Matrix tray changer 1
OSC 1 Odd shaped components 1
P&P 1 Pick&Place 1
PA 1 Placement area 1
PCB 1 Printed circuit board 1
SC 1 Single conveyor 1
SC 1 Station computer 1
SM 1 Dual conveyor in Single conveyor mode 1
SMD 1 Surface mounted device 1
TH 1 TwinHead 1
VS 1 Vision system 1
WLAN 1 Wireless Local Network 1
WT 1 Waffle-pack tray 1
WTC 1 Waffle-pack tray carrier 1