00193922-03.pdf - 第240页

5 Tasks on the machine User manual SIPLACE HF series 5.8 Docking the component trolley in or out Software Vers ion SR.50x.xx 01/2006 US Edition 240 5.8 Dockin g the componen t trolley in or out 5.8.1 Safety instru ctions…

100%1 / 374
User manual SIPLACE HF series 5 Tasks on the machine
Software Version SR.50x.xx 01/2006 US Edition 5.7 Refilling components
239
5.7 Refilling components
The online help contains information on refilling components with and without barcodes.
Æ With tape feeder modules, make sure that you always splice on a new tape early enough so
that the feeder modules do not run out of components.
Æ However, do not splice the tapes too early because if you wind the tape onto the new reel
after splicing the end of the old tape, the reel with the new tape may be overfilled. The tape
could then slip off the reel and become tangled. Under certain circumstances, this could
cause pick-up errors and prolonged down times.
Æ Always insert spindles when using tape reels of 15" (381 mm) and larger (see Fig. 5.3 - 3)
and make sure that the separating plates are inserted correctly (see Fig. 5.3 - 2
).
5 Tasks on the machine User manual SIPLACE HF series
5.8 Docking the component trolley in or out Software Version SR.50x.xx 01/2006 US Edition
240
5.8 Docking the component trolley in or out
5.8.1 Safety instructions for docking component trolleys in and out
WARNING
To prevent accidents (risk of crushing), the component trolley may only be docked in or out by
one person.
5
Fig. 5.8 - 1 Safety instructions for docking the component trolley in or out
(1) Button for docking the component trolley in or out, location 1
(2) Button for docking the component trolley in or out, location 2
(3) Button for docking the component trolley in or out, location 3
(4) Button for docking the component trolley in or out, location 4
(T) Direction of PCB transport
User manual SIPLACE HF series 5 Tasks on the machine
Software Version SR.50x.xx 01/2006 US Edition 5.8 Docking the component trolley in or out
241
The safety concept for the component trolley change requires the operator to press a button (item
1, 2, 3 or 4 in Fig 5.8 - 1
) on the input or output side of the machine in order to dock the component
trolley in or out. This ensures that the operator is always standing to the side of the placement
machine. In addition, the component trolley can only be docked in if the protective covers are
closed.
5.8.2 Docking out the component trolley
Æ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.
The PCB in progress will be completed. The icons of the SINGLE FUNCTIONS menu will
then be activated. 5
Æ Click on the desired icon SINGLE FUNCTIONS GANTRY.
Æ Select GANTRY FUNCTIONS.
Æ From this menu, click on the GO TO SET-UP POSITION button.
All the placement heads will move across the PCB conveyor to prevent them being dam-
aged when the component trolley is changed. 5
Æ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.
5.8 - 1
) until the trolley is docked out fully.
Æ Swivel the two handles up (item 1 in Fig. 5.8 - 2).
5
Fig. 5.8 - 2 Component trolley - swivel handles up to push
5
Æ With both hands on the handles, pull the component trolley out of the placement machine.