00193922-03.pdf - 第242页

5 Tasks on the machine User manual SIPLACE HF series 5.8 Docking the component trolley in or out Software Vers ion SR.50x.xx 01/2006 US Edition 242 5.8.3 Safety inst ructions for moving the component trolley W ARNING T o…

100%1 / 374
User manual SIPLACE HF series 5 Tasks on the machine
Software Version SR.50x.xx 01/2006 US Edition 5.8 Docking the component trolley in or out
241
The safety concept for the component trolley change requires the operator to press a button (item
1, 2, 3 or 4 in Fig 5.8 - 1
) on the input or output side of the machine in order to dock the component
trolley in or out. This ensures that the operator is always standing to the side of the placement
machine. In addition, the component trolley can only be docked in if the protective covers are
closed.
5.8.2 Docking out the component trolley
Æ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.
The PCB in progress will be completed. The icons of the SINGLE FUNCTIONS menu will
then be activated. 5
Æ Click on the desired icon SINGLE FUNCTIONS GANTRY.
Æ Select GANTRY FUNCTIONS.
Æ From this menu, click on the GO TO SET-UP POSITION button.
All the placement heads will move across the PCB conveyor to prevent them being dam-
aged when the component trolley is changed. 5
Æ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.
5.8 - 1
) until the trolley is docked out fully.
Æ Swivel the two handles up (item 1 in Fig. 5.8 - 2).
5
Fig. 5.8 - 2 Component trolley - swivel handles up to push
5
Æ With both hands on the handles, pull the component trolley out of the placement machine.
5 Tasks on the machine User manual SIPLACE HF series
5.8 Docking the component trolley in or out Software Version SR.50x.xx 01/2006 US Edition
242
5.8.3 Safety instructions for moving the component trolley
WARNING
To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-
ley.
Æ Always hold the handles with both hands when you want to move the component trolley.
Æ Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20° or more.
Æ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
Æ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast
enough.
5.8.4 Docking in the component trolley
PLEASE NOTE
Shorten the component tapes on the front end of the S feeder to approximately 3 cm before you
dock in the component trolley.
CAUTION
Check that the placement head is outside the range of the component trolley.
Æ Carefully push the component trolley into machine as far as the stop.
PLEASE NOTE
Close the protective covers since the component trolley can only be docked in if the covers are
closed.
Æ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.
5.8 - 1
) until the trolley is docked in fully.
User manual SIPLACE HF series 5 Tasks on the machine
Software Version SR.50x.xx 01/2006 US Edition 5.8 Docking the component trolley in or out
243
Æ Push the sleeve (item 1 in Fig. 5.8 - 2) up using both handles and swivel the handle down
(item 2 in Fig. 5.8 - 2
).
5
Fig. 5.8 - 3 Component trolley - Swivel handles down
(1) Push sleeve up
(2) Fold handle down