00193922-03.pdf - 第354页

7 Station extensions User manual SIPLA CE HF series 7.16 Magnetic pin support Software Version SR.50x.xx 01/2006 US Edition 354 7.16 Magnetic pin suppor t Item no. 001 1968 0-xx Wide boar ds tend to de flect dur ing plac…

100%1 / 374
User manual SIPLACE HF series 7 Station extensions
Software Version SR.50x.xx 01/2006 US Edition 7.15 Long board option
353
7.15 Long board option
Item no. 00119672-xx
The following PCB formats can be placed on the HF series of machines:
7
7
7
We can supply the "Long board" option as a retrofit kit for placing PCBs that are over 450 mm long.
If the "Long board" option is installed, then the following PCB formats can be processed:
7
7
7
The retrofit kit consists of the following parts:
– Complete mechanism: stopper, sensors, cables and assembly parts
– Optional CD for enabling the function on the SIPLACE Pro computer
– Retrofit instructions
PLEASE NOTE 7
The Long board option must be ordered 2x for the dual conveyor.
More detailed information can be found in the Long board retrofit instructions, item no. 00193888-
01.
Single conveyor 50 x 50 mm² to 450 x 508 mm²
Dual conveyor (standard width) 50 x 50 mm² to 450 x 216 mm²
Dual conveyor "Wide board" 50 x 50 mm² to 450 x 250 mm²
Dual conveyor in "Single conveyor" mode 50 x 50 mm² to 450 x 380 mm²
Dual conveyor in "Single conveyor", "Wide board" mode 50 x 50 mm² to 450 x 450 mm²
Single conveyor "Long board" 50 x 80 mm² to 610 x 508 mm²
Dual conveyor "Long board" 50 x 80 mm² to 610 x 216 mm²
Dual conveyor "Wide board", "Long board" 50 x 80 mm² to 610 x 250 mm²
Dual conveyor in "Single conveyor", "Long board" mode 50 x 80 mm² to 610 x 380 mm²
Dual conveyor in "Single conveyor", "Wide board", "Long
board" mode
50 x 80 mm² to 610 x 450 mm²
7 Station extensions User manual SIPLACE HF series
7.16 Magnetic pin support Software Version SR.50x.xx 01/2006 US Edition
354
7.16 Magnetic pin support
Item no. 00119680-xx
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting magnetic pin supports on the
lifting table.
7
Fig. 7.16 - 1 Magnetic pin support
User manual SIPLACE HF series 7 Station extensions
Software Version SR.50x.xx 01/2006 US Edition 7.17 Vacuum pump
355
7.17 Vacuum pump
Item no. 00119017-xx Vacuum pump
Item no. 00119696-xx Vacuum pump HF connection kit
Item no. 00119697-xx Vacuum pump HF/3 connection kit
Every Collect&Place head has a separate vacuum generator that supplies the holding and place-
ment circuit with the vacuum that it needs. The vacuum generator works on the Venturi principle.
The HF/3 machine's compressed air consumption is approximately 550 Nl/min, which means that
the compressed air supply must be dimensioned accordingly. If the owner does not have sufficient
capacity locally, the associated investment costs would be high, so we supply a vacuum pump that
will provide the necessary vacuum.
Other advantages of using the vacuum pump are:
– It roughly halves the machine's compressed air consumption.
– It reduces the input pressure.
– The placement machine can be easily integrated into existing lines.
– The ongoing operating costs reduce according to the energy costs.
7
7
The vacuum pump is maintenance-free and 100% oil-free. They have sufficient capacity to supply
the holding circuits of the Collect&Place heads.
Compressed air
consumption
without
vacuum pump
Compressed air
consumption
with
vacuum pump
Compressed air consumption
with 4 tape cutters and in
relation to the placement head
configuration
HF placement machine
C&P / TH
C&P / C&P
HF/3 placement machine
C&P / C&P / TH
C&P / C&P / C&P
350 l/min.
450 l/min.
550 l/min.
700 l/min.
250 l/min.
200 l/min.
350 l/min.
300 l/min.