00193922-03.pdf - 第221页
User manual SIPLAC E HF series 4 Setting up and commissioning Software Vers ion SR.50x.xx 01/2006 US Edition 4.4 Setting up the placement machine 221 Æ M ake su re that you do not u nscrew the m iddle ma chine feet so fa…
4 Setting up and commissioning User manual SIPLACE HF series
4.4 Setting up the placement machine Software Version SR.50x.xx 01/2006 US Edition
220
4
Fig. 4.4 - 26 Setting the height for the outer machine feet
(1) Adjusting screw M24x2x120 for adjusting the height
(2) Outer machine foot
(3) Clamp
(4) M24x90 hexagon socket head screw
Æ Check the required PCB transport height.
Æ If the placement machine has been aligned, use the size 19 Allen key to tighten the hexagon
socket head screws M24x90 (Pos. 4) for holding the clamps on all the outer machine feet
(item 3).
Æ Unscrew the middle machine feet using a hook wrench 135 - 145 until they are seated firmly
on the ground.
User manual SIPLACE HF series 4 Setting up and commissioning
Software Version SR.50x.xx 01/2006 US Edition 4.4 Setting up the placement machine
221
Æ Make sure that you do not unscrew the middle machine feet so far that the machine is no
longer adjusted.
4
4
4
4
4
4
4
Fig. 4.4 - 27 Aligning and locking the "HS50" machine foot
(1) Spacer
(2) Middle machine foot
(3) M24 lock nut
4
Æ Use the spirit level to ensure that the placement machine is precisely aligned.
Æ Use the size 65 open-ended spanner to tighten the M24 lock nut (item 3).
4 Setting up and commissioning User manual SIPLACE HF series
4.5 Adapting the component trolley to the PCB transport height Software Version SR.50x.xx 01/2006 US Edition
222
4.5 Adapting the component trolley to the PCB trans-
port height
The component trolley can be set to the following PCB transport heights with just a few simple
actions:
830 mm ± 15 mm Standard height
900 mm ± 15 mm SMEMA height
930 mm ± 15 mm SMEMA height
950 mm ± 15 mm SMEMA height 4
4
Fig. 4.5 - 1 Component trolley with a PCB transport height of 950 mm
(1) Holes in the guide columns for the transport heights of 830 to 950 mm
(2) Component trolley table