00193922-03.pdf - 第59页
User manual SIPLAC E HF series 2 Operational safety Software Vers ion SR.50x.xx 01/2006 US E dition 2.5 Safety instructions for operat ing the machine 59 2.5.6 Safety instructions for docking t he component trolley in or…
2 Operational safety User manual SIPLACE HF series
2.5 Safety instructions for operating the machine Software Version SR.50x.xx 01/2006 US Edition
58
2.5.5 Safety instructions for the TwinHead component cameras during
a placement head change
WARNING 2
When the placement head is changed from the TwinHead to the Collect&Place head, the Twin-
Head's component vision cameras (stationary, P&P, type 22, 50 x 40, and type 20, 8 x 8) must be
removed, otherwise the Collect&Place head will collide with the camera housings.
2
Fig. 2.5 - 4 Safety instructions for the TwinHead vision modules during a placement head change
2
(1) Assembly position, CO camera (stationary, P&P (type 22) 50 x 40), location 1 (HF)
(2) Assembly position, CO camera (stationary, P&P (type 20) 8 x 8), location 1 (HF)
(3) Assembly position, CO camera (stationary, P&P (type 22) 50 x 40), location 3 (HF and HF/3)
(4) Assembly position, CO camera (stationary, P&P (type 20) 8 x 8), location 3 (HF and HF/3)
User manual SIPLACE HF series 2 Operational safety
Software Version SR.50x.xx 01/2006 US Edition 2.5 Safety instructions for operating the machine
59
2.5.6 Safety instructions for docking the component trolley in or out
WARNING 2
To prevent accidents (risk of crushing), the component trolley may only be docked in or out by
one person.
2
Fig. 2.5 - 5 Safety instructions for docking the component trolley in or out
2
(1) Buttons on the input and output sides
2
The safety concept for the component trolley change requires the operator to press a button (item
1) on the input or output side of the machine in order to dock the component trolley in or out. This
ensures that the operator is always standing to the side of the placement machine. In addition, the
component trolley can only be docked in if the protective covers are closed.
PLEASE NOTE 2
Shorten the component tapes on the front end of the feeder to approximately 3 cm before you
dock in the component trolley. The ends of the tape will then slide into the opening in the used
2 Operational safety User manual SIPLACE HF series
2.5 Safety instructions for operating the machine Software Version SR.50x.xx 01/2006 US Edition
60
tape channel without manual assistance. This ensures that the operator no longer has to reach
into the danger area of the used tape channel.
2.5.7 Safety instructions for moving the component trolley
WARNING
To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-
ley.
Æ Always hold the handles with both hands when you want to move the component trolley.
Æ Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20° or more.
Æ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
Æ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast
enough.
2.5.8 Note on the ESD safety of the placement machines
Only use nozzles that are identified as conductive. This is the only way to meet the requirements
for the ESD safety of the machine.