00193922-03.pdf - 第317页

User manual SIPLAC E HF series 7 Station extensions Software Vers ion SR.50x.xx 01/2006 US E dition 7.2 Sens or for the com ponent reject bin 317 7.2 Sensor for the co mponent reject bin Item no. 001 168 48-xx The sen so…

7 Station extensions User manual SIPLACE HF series

7.1 Nozzle changer Software Version SR.50x.xx 01/2006 US Edition

316

7.1.3.6 Component reject bin

A component reject bin may be installed for the SIPLACE TwinHead. This is positioned beside the

fine-pitch vision module (see item 4 in Figs. 7.1 - 18

, page 312 and 7.1 - 19, page 313).

Fig. 7.1 - 22 Component reject bin

7.1.4 Grippers and special nozzles

The SIPLACE placement machines can process components based on through hole technology

and odd-shaped (OSC) components, in addition to the standard SMT spectrum. SIEMENS A&D

also continuously develops special nozzles and grippers in parallel.

Special nozzles are available for all placement heads in order to process placement jobs with max-

imum speed, precision and flexibility. The use of automatic nozzle changers also reduces the set-

up times that occur at a product change.

SIEMENS A&D can provide mechanical grippers for Pick&Place heads. If a component's surface

is not suitable for sucking up with nozzles, then it can be picked up and placed with mechanical

grippers. There are two types of gripper, and their functions can be divided into two groups:

– Grippers that grip the component at its outer edges and

– Grippers that grip the component at its inner edge.

Information on special nozzles and grippers is available from SIEMENS A&D. For the production

of special magazines and grippers, again contact SIEMENS A&D.

User manual SIPLACE HF series 7 Station extensions

Software Version SR.50x.xx 01/2006 US Edition 7.2 Sensor for the component reject bin

317

7.2 Sensor for the component reject bin

Item no. 00116848-xx

The sensor for the component reject bin monitors whether the reject bin is seated correctly in its

mount.

– If the reject bin was not inserted correctly, the placement machine cannot be started.

– If the reject bin jumps out of its mount during the placement process, the machine is stopped

immediately to avoid a head crash.

Each reject bin can be monitored by a separate sensor.

7 Station extensions User manual SIPLACE HF series

7.3 Component camera for the TwinHead, FC camera Software Version SR.50x.xx 01/2006 US Edition

318

7.3 Component camera for the TwinHead, FC camera

7.3.1 Structure of the component camera stationary P&P, type 20, 8 x 8 (FC camera)

Item no. 00119618-xx

Fig. 7.3 - 1 CO camera stationary P&P, type 20, 8 x 8 (FC camera)

(1) Camera housing with integral camera and camera amplifier

(2) Glass plate - over the illumination and lens levels

7.3.1.1 Technical data

Component dimensions 0.6 x 0.3 mm² up to 8 x 8 mm² for single component measurement

Range of components 0201 to SO, PLCC, QFP, sockets, plugs, BGA, special compo-

nents, bare dies, flip-chips, shields

Min. lead pitch 0.25 mm

Min. ball/bump diameter 0.08 mm

Field of vision 11 x 11 mm²

Method of illumination Front-lighting (6 levels, programable as required)