2OM-1011-002.pdf - 第15页

0305-001 Tg0858-PM-PM 1-B

0305-001 Tg0858-PM-PM

Section 1

Scope of Each Data

1-A

This section explains the data required for the automatic

operation.

0305-001 Tg0858-PM-PM1-B

0305-001 Tg0858-PM-PM

1. Scope and Description of Each Data

To place components with this machine

It is required to create and edit pattern program data (operation data, set-up

data, component data, and placement data), component library data, and vari-

ous data (device data, auto operation set-up, etc.).

1. Scope and Description of Each Data

1-1

Fig. 2A1

Pattern Program

Operation Data : This data is used to generally manage pattern program data.

P.C.B. size, pattern program offset, etc., can be set.

Set-Up Data : This data is used to determine whether or not the conveyor

width should be set up automatically.

Component Data : This data is used to set parameters which determine a type

(ID) of component to be allocated to each feeder slot No.

(FDR No.).

Placement Data : This data is used to set parameters which select compo-

nents (FDR No.) and determine coordinates and directions

of components to be placed on a production P.C.B.

Component Library Data

This information data is used to pick up, recognize, and place each component.

Included in this library data are types and sizes of components, package types,

placement speed, etc.

Various Data

Device Data, Auto Operation Set-Up, Offset Data, Test Mode, Nozzle Stocker

Data, and Nozzle Type Data