4H4CEOM1.pdf - 第100页
Page 3-22 3-4-4 Nozzle Changing This is used to change the nozzle attached to the optional head for the one in the nozzle changer . Choose a target head. Choose a head. The selected head is highlighted. Choose a nozzle i…
Page 3-21
FUNCTIONS
3
3-4-2 Conveyor Width Adjustment
This is used to adjust the widths of all the conveyors to the set size of board automatically.
∗ Make sure no board is on the conveyor beforehand.
∗ After you have pressed Cnvr adjustment on the machine adjustment menu, make sure the servo
switches are ON, and then press
UNLOCK
→
START
. The conveyor width adjustment screen is dis-
played.
Press this switch to adjust the width to the
board width of production data.
When you would like to set the optional board
width, enter it with numeric keys.
Press
UNLOCK
+ Run .
The rails are adjusted automatically.
3-4-3 Board Transport
This is used to perform each step from transporting board in to transporting it out to the next
process.
∗ After you have pressed PCB transfer on the machine adjustment menu, make sure the servo
switches are ON, and then press
UNLOCK
→
START
. The board transport screen is displayed.
∗ The operating method is the same as that of the board transport of production settings.
( 3-2-4 Board Transport)
Machine Adjustment
1
2
M35E
TURN OFF THE SERVO SWITCH BEFORE PLACING A BOARD ON OR
REMOVING IT FROM THE CONVEYOR.
You will have serious injury if the machine is actuated.
WARNING
4H4C-E-OMA03-A01-01
Page 3-22
3-4-4 Nozzle Changing
This is used to change the nozzle attached to the optional head for the one in the nozzle changer.
Choose a target head.
Choose a head.
The selected head is highlighted.
Choose a nozzle in the changer.
Pressing
UNLOCK
+ Nozzle set fits the nozzle in
the nozzle changer to the head.
Pressing
UNLOCK
+ Nozzle remove removes a
nozzle from the head and puts it away in the
nozzle changer.
3-4-5 Pick-up and Mounting Motions
This is used to check the pick-up, recognition and mounting position of the chosen head or nozzle.
When AR is selected
Choose the desired stage.
Choose a head or a center.
Press
UNLOCK
+ Each position key.
The chosen head moves to that position.
In the Pick up field, set the address and type.
(When AR is selected, press first then
select a tray.)
In the Mount field, choose the X-Y coordinates.
• At the pick-up position, rising/lowering Z-axis
and letting the sending rod out/back can be
performed.
When AF is selected
Machine Adjustment
1
2
3
4
1
2
3
4H4C-E-OMA03-A01-04
Tray A
Tray B
4H4C-EEn-MaPm-005
Page 3-23
FUNCTIONS
3
3-4-6 Tray Adjustment
This is used to draw out the optional tray pallet and check how it puts back to the magazine.
Select the tray feeder whose motion you will
check.
Select the tray address.
As the need arises, toggle the motion speed.
Every time this is pressed, the switch will
change over in sequence from: “Slow” → “Mid”
→ “Fast” → “Slow”.
UNLOCK
+
Draws out the specified tray pallet to the pick-
up position.
UNLOCK
+
Draws out the specified tray pallet to the lifter
position at that height.
UNLOCK
+
Draws out the specified tray pallet to the supply
area.
UNLOCK
+
Puts the tray pallets drawn out to the pick-up
position and the supply area back to the
magazine.
Machine Adjustment
4H4C-E-OMA03-A01-01
1
2
3
4
Pickup posi
Pallet feed
Pickup posi
Lifter move
Replenish posi
Pallet feed
Pallet storage