4H4CEOM1.pdf - 第116页
Page 4-8 Starting Production 4-3-4 Returning to Origin Before mounting, each axis returns to its origin. All the axes return to their origins. •“ Complete ” is displayed for the axes returned to their origins. 4H4C-E-OMA…
Page 4-7
PRODUCTION
4
4-3-3 Self-diagnosis
The machine inspect itself.
While the following screen is displayed, the state of machine is
checked automatically.
• When the state is normal, “Return to origin”
screen is displayed.
If any trouble is detected during a self-diagnosis, the following
screen is displayed.
<E.g.>
• If any trouble is detected, the trouble item is
displayed.
∗ Refer to “Maintenance Manual” to solve the
trouble.
Starting Production
4H4C-E-OMA04-A01-01
Page 4-8
Starting Production
4-3-4 Returning to Origin
Before mounting, each axis returns to its origin.
All the axes return to their origins.
•“Complete” is displayed for the axes returned to
their origins.
4H4C-E-OMA04-A01-00
Page 4-9
PRODUCTION
4
4-4 During Production
4-4-1 Information and Functions during Production
Basic production information, the addresses of the empty feeders and the state of operation are
displayed.
• Production ( 3-3-1 Run Informa-
tion)
The number of produced boards and blocks
• OpeRate ( 3-3-1 Run Information)
Operating rate of the machine
• Cycle time
The time from when the board starts to be
loaded onto the mounting stage until when it
starts to be unloaded after it has been
mounted.
• Mount points
The number of the chips which have been
mounted
• Cycle stop ( 4-5-1 Stop Operation)
If you want to stop production temporarily after
the current board is mounted, press this switch.
• Parts empty ( Chapter 5 SETTING
PRODUCTION MATERIALS)
The addresses of the empty feeders during
production are displayed.
• Status
The current state of the machine is displayed.
4H4C-E-OMA04-A01-02