4H4CEOM1.pdf - 第14页

Page 12 SAFETY PRECAUTIONS Be sure to observe DANGER 4H4C-E-OMA00-A03-01 L06EB DO NOT OPEN THE COVER WHEN OPER- A TING. Y ou will have serious injury if you touch the active part inside. L02E DO NOT TOUCH AC- TIVE P ART …

100%1 / 138
Page 11
SAFETY PRECAUTIONS
Be sure to observe
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degree of danger or injury resulting from incorrect use due to failure to read an indica-
tion is classified and described as follows.
The matters should be observed are classified and described according to the symbols
shown below.
(The followings are only some examples of the symbolic indications.)
This indication refers to a situation which is considered that
there is imminent danger of death or serious injury.
This indication refers to a situation which is considered that
there is a possibility of death or serious injury.
This indication refers to a situation which is considered that
there is a possibility of only injury or physical damage.
These symbols indicate matters to which attention must be paid.
These symbol indicate an action that must not be carried out.
DANGER
WARNING
CAUTION
These symbol indicate an action that must be carried out.
4H4C-E-OMA00-A03-02
Page 12
SAFETY PRECAUTIONS
Be sure to observe
DANGER
4H4C-E-OMA00-A03-01
L06EB
DO NOT OPEN THE
COVER WHEN OPER-
ATING.
You will have serious injury if
you touch the active part inside.
L02E
DO NOT TOUCH AC-
TIVE PART WHEN
OPERATING.
You will have serious injury if
you touch the active part.
Page 13
SAFETY PRECAUTIONS
Be sure to observe
E
M
E
R
G
E
N
C
Y
S
T
O
P
2
Emergency stop button
(At the rear side)
If you sense any danger or abnormality, press an emergency stop button to
stop the machine.
If you continue to operate the machine in a dangerous or abnormal state, a breakdown or an
accident will occur.
There are two emergency stop buttons on CM301-D. Pressing any one of them stops operation.
Press the nearest
one.
Remove the cause of the danger or abnormality, then re-start operation.
To reset the emergency
stop button, pull it.
M104E
WARNING
E
M
E
R
G
E
N
C
Y
S
T
O
P
4H4C-E-OMA00-A03-00
1
Emergency stop button
(At the front side)
E
M
E
R
G
E
N
C
Y
S
T
O
P
CM301-D
4H4C-AA01