4H4CEOM1.pdf - 第18页

Page 16 SAFETY PRECAUTIONS Be sure to observe Observe the following items before placing your hand or other part of your body in an active part of the machine in order to feed production material, change machine set-up, …

100%1 / 138
Page 15
SAFETY PRECAUTIONS
Be sure to observe
Cut off the power supplying
to the machine.
Turn OFF the
breaker that is
connented to the
machine.
Observe the following items before placing your hand or other part of
your body in an active part of the machine in order to feed production
material, change machine set-up, or adjust machine settings.
You may be injured if the machine is actuated. Also you may be struck by an electric
shock.
There are three levels of procedure, shown below, for each kind of work.
Repairing such as a control BOX. --------------------------------------------- Cut off the power supplying to the
machine.
Turning OFF the power supply routinely------------------------------------- Turn OFF the power supply.
Replacing a control part such as a sensor
Disassembling or replacing parts
Changing production board types or working for daily inspection ----- Turn OFF the servo switch.
Placing a board onto the conveyor or removing one from there
Setting production materials such as feeders
1
M73EB
2
1
2
3
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK BACK LIGHT OFF
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK BACK LIGHT OFF
CM301-D
4H4C-AA01
Turn OFF the power
supply.
Turn OFF the servo
switch.
Rear panel
Turn OFF the servo
switch.
Front panel
WARNING
3
4H4C-E-OMA00-A03-00
Page 16
SAFETY PRECAUTIONS
Be sure to observe
Observe the following items before placing your hand or other part of
your body in an active part of the machine in order to feed production
material, change machine set-up, or adjust machine settings.
You may be injured if the machine is actuated. Also you may be struck by an electric
shock.
There are three levels of procedure, shown below, for each kind of work.
Repairing such as a control BOX. --------------------------------------------- Cut off the power supplying to the
machine.
Turning OFF the power supply routinely------------------------------------- Turn OFF the power supply.
Replacing a control part such as a sensor
Disassembling or replacing parts
Changing production board types or working for daily inspection ----- Turn OFF the servo switch.
Placing a board onto the conveyor or removing one from there
Setting production materials such as feeders
M73EB
1
2
3
CM301-DU
WARNING
Cut off the power supplying
to the machine.
Turn OFF the
breaker that is
connented to the
machine.
1
2
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK BACK LIGHT OFF
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK BACK LIGHT OFF
4X4C-AA00
Turn OFF the power
supply.
Turn OFF the servo
switch.
Rear panel
Turn OFF the servo
switch.
Front panel
3
4H4C-E-OMA00-A03-00
Page 17
SAFETY PRECAUTIONS
Be sure to observe
4H4C-E-OMA00-A03-02
WARNING