4H4CEOM1.pdf - 第122页
Page 4-14 = MEMO = 4H4C-E-OMA04-A01-01
Page 4-13
PRODUCTION
4
4-6 Completion of Production
4-6-1 Automatic Stop
When the front stocker sends out the last board in the set production count, the stocker transmits
the production end signal to the next process (e.g. screen printer, etc.). When this machine gets the
signal, it automatically enters a state of production completion after producing the last board, and
the main menu screen is displayed.
4-6-2 Finishing Machine
When the main menu is displayed, turn off the power of the machine in the following step.
1. Turn OFF the servo switch.
2. Turn OFF the power supply switch.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
OFF ( )
ON ( )
SERVO
4H4C-E-OMA04-A01-01
Page 4-14
= MEMO =
4H4C-E-OMA04-A01-01
Page 5-1
4H4C-E-OMA05-A01-00
Chapter 5
SETTING PRODUCTION MATERIALS
Chip Feeding Devices
This machine is fed with chips by the following three devices. Chips are supplied by
changing trays, changing tape feeders or supplying chips to bulk feeders.
Tray Feeder
• Chips are fed while on the tray.
• To supply chips, take out the pallet where the
tray is set.
(Chips can be exchanged also by the
magazine.)
Tape Feeder (Option)
• Chips are fed by the reeled tape.
• Chips are supplied by changing tape feed-
ers.
Bulk Feeder (Option)
• Chips are fed by the bulk cassette.
• Chips can be supplied while the feeder is set
on the feeder table.
∗ Bulk feeder supporting unit (option) is
required.
∗ For information about how to handle tape and bulk feeders, refer to their respective manuals.