4H4CEOM1.pdf - 第115页
Page 4-7 PRODUCTION 4 4-3-3 Self-diagnosis The machine inspect itself. While the following screen is displayed, the state of machine is checked automatically . • When the state is normal, “ Return to origin ” screen is d…
Page 4-6
4-3-2 Starting Operation
1. Press
Production
on the main menu.
2. Make sure the servo switch is ON,
then press
UNLOCK
→
START
.
• The steps from self-diagnosis ( 4-3-3) to
returning to origin ( 4-3-4) are performed.
After that, when a board is transported in from
the previous process, production starts.
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK
KEY LOCK
BACK LIGHT OFF
BACK LIGHT OFF
1
2
Starting Production
4H4C-E-OMA04-A01-01
Page 4-7
PRODUCTION
4
4-3-3 Self-diagnosis
The machine inspect itself.
While the following screen is displayed, the state of machine is
checked automatically.
• When the state is normal, “Return to origin”
screen is displayed.
If any trouble is detected during a self-diagnosis, the following
screen is displayed.
<E.g.>
• If any trouble is detected, the trouble item is
displayed.
∗ Refer to “Maintenance Manual” to solve the
trouble.
Starting Production
4H4C-E-OMA04-A01-01
Page 4-8
Starting Production
4-3-4 Returning to Origin
Before mounting, each axis returns to its origin.
All the axes return to their origins.
•“Complete” is displayed for the axes returned to
their origins.
4H4C-E-OMA04-A01-00