4H4CEOM1.pdf - 第81页
Page 3-3 FUNCTIONS 3 4H4C-E-OMA03-A01-00 3-1-2 Engineer Mode Menu Configuration Engineer Data modify Describes customizing the functions of the operator mode. 3-5-6 Customizing Operator Mode Describes setting the time of…
Page 3-2
4H4C-E-OMA03-A01-00
3-1 Menu Configuration
3-1-1 Operator Mode
Operator
Production
Describes starting automatic production.
Chapter 4PRODUCTION
Describes resetting production information.
3-3-4Reset
Describes checking the nozzle arrange-
ment of head.
3-2-1Nozzle Settings
Describes setting the mobile table for the
exchange mode.
3-2-2Selecting Table Mode
Describes checking feeder arrangement.
3-2-5Feeder Arrangement
Describes changing board supports.
3-2-6Changing Support Pins
Describes displaying the information
during running.
3-3-1Run Information
Describes calculating the consumption
of chips to the count of production
boards.
3-2-3Calculating Chip Consumption
Displays the chip pick-up information
during production.
3-3-3Pick-up Information
Describes displaying the factors that made
the machine stop during production.
3-3-2Stop Information
Performance
info
Product
config
Describes checking board transport motion.
3-2-4Board Transport
Describes checking and changing the
pick-up start position.
3-2-7Tray Counter
Describes checking the pallets at the
pick-up and supply positions.
3-2-8Tray Pallet Setup
Describes setting the machine’s motion.
3-2-9Motion Setup
Page 3-3
FUNCTIONS
3
4H4C-E-OMA03-A01-00
3-1-2 Engineer Mode
Menu Configuration
Engineer
Data modify
Describes customizing the functions of the operator mode.
3-5-6Customizing Operator Mode
Describes setting the time of the machine.
3-5-4Setting Time
Describes specifying and resetting defective nozzles.
3-5-3Defective Head
Describes checking nozzle stock data.
7-7Nozzle Stock Data
Describes checking and modifying mount data.
7-9Mount Data
Describes checking production data.
7-12Data Check
Describes checking and modifying board data.
7-2PCB Data
Describes checking nozzle arrangement data.
7-6Nozzle Arrangement Data
Describes teaching production data.
Chapter 8TEACHING
Describes checking and modifying board recognition data.
7-3Board Recognition Data
Describes checking feeder layout list and stock data.
7-4Feeder Layout / Stock Data
Describes checking the settings of function switches.
7-10Function Switch
Describes checking and modifying block attribute data.
7-8Block Attribute Data
Describes checking the correction value by pick-up position learning.
3-5-2Pick-up Position Learning
Describes changing the conditions for the motions for production.
3-5-1Switches for Adjustment
Describes loading/saving machine parameters.
Chapter 6Sub operation
Describes loading production data.
Chapter 6Main operation
Refer to the Mainte-
nance Manual.
File
managment
Machine
parameter
Machine
config
Machine
adjust
Displays the tape feeder library data.
7-11Feeder Library
Displays the recognition library data.
7-11Recognition Library
Displays the nozzle library data.
7-11Nozzle Library
Describes displaying the input addresses in bit.
3-4-7Input Check
Describes checking recognition processing motion.
APPENDIX A
RECOGNITION DEVICE
Describes returning all axes to their origins.
3-4-1Returning to Origin
Describes adjusting the width of conveyor.
3-4-2Conveyor Width Adjustment
Describes transporting board onto conveyor.
3-4-3Board Transport
Describes changing nozzles.
3-4-4Nozzle Changing
Describes displaying the load onto ring.
3-4-11Ring Load Information
Describes checking the state of valve and working it.
3-4-8Output Check
Describes checking the current positions and states of all axes.
3-4-9Axis Information
Describes pick-up, recognition and mounting motions.
3-4-5Pick-up and Mounting Motions
Describes drawing out the tray pallet.
3-4-6Tray Adjustment
Describes setting the backlight-off time.
3-5-5Setting Backlight
Page 3-4
3-2 Production Settings
This is used for the settings requisite for production and to check the motion.
1. Press
Product
config
on the main menu.
•“Production config menu” is displayed.
∗ Pressing a function switch displays each
setting screen.
4H4C-E-OMA03-A01-02